Wiki User
∙ 2009-04-13 16:27:50The alarm system on your Jeep Grand Cherokee is controlled by a small, approximately 3 inch square box that plugs into wiring under your dash on probably the drives side towards the middle. It is black in color and is printed with the words "alarm module. If you unplug that the alarm system will be permanently disabled and starting issues may be resolved as well.
Wiki User
∙ 2009-04-13 16:27:50how to disable alarm on 1998 jeep grand cherokee
i need to disable jeep factory alarm 1997 cherokee
It can not be disabled. It is in the programming of several computers.
The factory alarm can not be disabled. The alarm is a function of the engine, body, and key computers. The alarm is reset by unlocking the doors with a key or remote. If malfunctioning a scan tool is required to diagnose.
try turning the key left then right in the passenger side door, may need to do more then once.
how to disable alarm on 1998 jeep grand cherokee
i need to disable jeep factory alarm 1997 cherokee
The factory alarm can not be disabled, only repaired if malfunctioning.
It can not be disabled. It is in the programming of several computers.
You will have to uninstall the alarm and rewire the vehicle. It is likely the ignition wires are run through the alarm.
how to disconnect alarm in a 2000 pontiac grand am se
on my 1993 jeep GCL i removed fuse 6 and 7 from the fuse box to disable my alarm i hope this helps
The factory alarm can not be disabled. The alarm is a function of the engine, body, and key computers. The alarm is reset by unlocking the doors with a key or remote. If malfunctioning a scan tool is required to diagnose.
You can not. The "alarm" is an integral part of at least three computers on the Jeep. The pcm (engine), bcm (body functions), and the skim (chip key system).
try turning the key left then right in the passenger side door, may need to do more then once.
anonymously
the aftermarket alarm kit