There are bolts underneath the seat. Just undo the bolts and when you get the bolts undone you will notice that there is also a little cord that goes to the seat belt just unhook that cord and you will then have a seat separated from Jeep
Grab the straps on both of the seat bottoms and pull them forward, the flip the handle on the top and side of the back of the seat and fold it down.
The bottom seats will fold to the back of the front seats and the back of the rear seat will fold down making one big cargo area.
There will be a lever on the side of the seat by the door. Pull the lever up while pulling down on the back of the seat.
A 1991 Jeep Cherokee computer is what fits a 1991 Jeep Cherokee.
Why Is the fan is not running fast enough to cool down the motor? On A Jeep grand Cherokee Laredo 202
1985-1996 Jeep Cherokee XJ should interchange 1997-2001 Jeep Cherokee XJ should interchange
An AW4 transmission from a 1991 Jeep Cherokee will not fit into a 1988 Jeep Cherokee. The transmissions in the varying years do not appear to be compatible with one another.
The grand Cherokee is a body style, sport is a trim package that is used on all jeep models(wrangler, Cherokee, grand Cherokee, patriot, ...)
lift the handle on back of the seat
first pull the seat forward then release the back by the leverl on the siides of the back by the seat belt lap harness
they are STILL making them with fold down windshields...
== ==
A 1991 Jeep Cherokee computer is what fits a 1991 Jeep Cherokee.
Why Is the fan is not running fast enough to cool down the motor? On A Jeep grand Cherokee Laredo 202
driver side on the back of the motor where is crak sensor on 94 jeep 4.0 grand Cherokee
fuse 22
on the 89 jeep grand wagoneer there is a lever on the pasanger side between the seat back and the wheel well. The lever is a flat piece of metal that you pull forward to release the lock. the back will fold down and the whole seat tips forward. I hope this helps
Yes
They are 5.25"
It is bolted on the back of the engine.