0
What else can I help you with?
What is the valve clearance for a 1992 Honda TRX 250X?
Intake and exhaust valves have the same clearance: 0.10 mm (0.0004 in).
How is the valve clearance for 1987 Trx 250 x?
The valve clearance for a 1987 Honda TRX 250X is typically set at 0.05 mm (0.002 inches) for the intake valves and 0.08 mm (0.003 inches) for the exhaust valves. It's important to check and adjust the valve clearance regularly to ensure optimal engine performance. Make sure the engine is cold before making adjustments, and refer to the service manual for specific procedures and specifications.
What type of oil to use in 1992 Honda 250x?
10 w 40 is what honda recomends
1992 trx 250x a valve broke off damage to the head and piston did not hurt the cylinder can you just get it honed or does it need bored out?
If there was no damage to the cylinder bore then you will not need to bore it oversize.If there was no damage to the cylinder bore then you will not need to bore it oversize.
What is the Top speed 1987 Honda 250x?
I clocked my 1987 250x at 62mph using a friend's car following.
How do you work out 2x to the power of four- 250x?
-248
Does the 1987 Honda 250x have reverse?
Yes it does.
How often oil change for 1992 Honda 250x?
Use nothing but SAE 10w30 Synthetic oil and change it once a year or every 5,000 miles whichever comes first.
What oil for trx 1987 250x?
10w-30
What is the answer to X250 when solving for X?
250x + 250 * x.
How fast does a 1991 Honda 250X go?
not fast enough
What is the top speed of a 2012 Honda trx 250x?
60
