Im not really sure what the code is but I was able to set up my remote by performing a search.
Following these steps:
1. Press the TV device key and then press Setup until the remote blinks twice
2. Pres 9-9-1 ( the remote should blink twice)
3. Press 1 ( The TV light should blink once)
4. Press the Power Key
5. Press the Ch+ key until the TV turns off.
6. Once the TV turns off press Setup to lock the key in.
I only had to press CH+ 3 times. When I performed the key playback test i got 11100 so you can try that but I would perform the search its alot easier to me.
0091
What is universal remote control code for air-con?
how to program my tv with the RCA D 770 - universal remote control which has no code search button
I have provided the TV remote codes for the Curtis Mathis TV.They are: 680, 645, 712, 670, 674, 516, and 506.I have also provided instructions on how to program the DISH remote to your TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Dv810x
the code for Curtis dvd1041
0091
I just bought Curtis ledvd1975A TV/DVD combo. I have tried every RCA, SONY, Sylvania code as suggested by other message boards in the Comcast site. I have the Xfinity remote. Any ideas for other codes to use?
If you are referring to a Curtis Mathes TV, then there are a few different DISH Network remote codes that you can try & one should successfully program your remote, 516, 531, 595, or 253.
If you are referring to a Curtis Mathes TV, then there are a few different DISH Network remote codes that you can try & one should successfully program your remote, 516, 531, 595, or 253.
The airport code for Curtis Field is BBD.
remote code for arc-u1 remote on lg tv
remote code for tv/dvd kenmark
I just had At&t U-Verse installed 1/31/13. The tech who installed our system could not get the remote code to work with Apex digital TV. Finally found a code that works, try 1400. i was so stoked that i called the tech who provided the install. Hope this helps.
You may find some website that sells new remote controls by googleing (on your PC search engine) the words "remote control." I bought one for a friend on the internet, i think, about ten years ago but can't remember the website.
Remote Desktop is proprietary; the source code is not available.
Code on reversal remote for haier aircon 9000btu