A dartboard manufactured by Widdy is an American style board, usually found around Philadelphia and that region. This is opposed to an English style board.
An American board has both the double and triple scoring rings on the outside. It also has thin inlaid steel wires separating the sections. This differs from the English board that most people know, which has the double ring on the outside, and the triple ring halfway between the cork and outer ring. For an English style board, the official measure is "center of the bullseye is 5 feet 8 inches from the ground." However, for American style boards like your Widdy, 5'3" is the correct height. See this blowup:
http://www.americanstyledarts.com/widdyDistanceBlowup.html
the height has the same measurements as the width.
The height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5" inches from the front of the board for steel tip darts.
The common US distance from throw line to face of board for soft tip darts is 8 feet. 7'-9.25 inches is for steel tip darts.
It is 11 inches by 14 inches. It is wider than a regular piece of paper but the same length.
5'8" from the floor to the CENTER of the BULLSEYE is the height. 7'9.25" from the FACE of the board is the throw line.
There is no specific collective noun for the noun members. However, a noun suitable for the situation can be used, such as a board of members, a roster of members, a meeting of members, etc.
A dartboard manufactured by Widdy is an American style board, usually found around Philadelphia and that region. This is opposed to an English style board.An American board has both the double and triple scoring rings on the outside. It also has thin inlaid steel wires separating the sections. This differs from the English board that most people know, which has the double ring on the outside, and the triple ring halfway between the cork and outer ring. For an English style board, the official measure is "center of the bullseye is 5 feet 8 inches from the ground." However, for American style boards like your Widdy, 5'3" is the correct height. See this blowup:http://www.americanstyledarts.com/widdyDistanceBlowup.htmlthe height has the same measurements as the width.
You can't rotate only the inner circle. You can rotate the entire Widdy Board by grabbing it on both sides and moving it in the direction you want to rotate it.
2.5 inches
The height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5" inches from the front of the board for steel tip darts.
That is 32 board feet.
A standard toe board shall be a minimum of four inches nominal in vertical height from its top edge to the level of the floor, platform, runway, or ramp.
7 feet, 9 1/4 inches
you will need the board's thickness to answer this question.
if the board is 8 inches width by 8 foot long by 2 inches thick at $5.50 per linear board what is the price per board?
The common US distance from throw line to face of board for soft tip darts is 8 feet. 7'-9.25 inches is for steel tip darts.
Distance from the floor to the base of the back board
If you have a board that is 1 by 12 inches that is 10 foot long you will have 10 inches of board feet. This a math problem.