0
All the components needed to connect 2 computers together are two Ethernet cards, a network switch and 2 Ethernet cables. Alternatively a single USB transfer cable can be used for simple file transfers.
Wiki User
∙ 9y ago
Anonymous
Cable
Add your answer:
Earn +20 pts
What Consists of electronic components that store instructions waiting to be executed by the processor data needed by those instructions and the results of processed data information?
Memory
How do you get a connetion on the PS3?
After you have broadband or DSL internet service then you need to purchase the equipment needed to connect the PS3. The PS3 can be connected only with WiFi or an ethernet cable to your modem or router
Which is NOT true of radio astronomy?
radio astronomers can collect data only after dark... :) this is not true because all that is needed to be done is for the astronomer to receive to their computers. now that is an epic answer... Kris forster...aka "dad" you suck. :)
Are Johnny and Ponyboy friends?
Johnny is special to his friends because he was always there for them when they needed his help
Do rechargeable batteries leak?
Batteries in general are built to not leak. The components needed to keep an electrical charge are poisonous and can be extremely hazardous to your health if swallowed or even touched. A probable cause of a battery leaking would be exposure to extreme temperatures that the inner components do not do well with. Also, after prolonged periods of time, the battery metals might begin to rust and decay, thus allowing the leak.
Is a crossover cable needed to connect Host computers to the switch Why or why not?
Is a crossover cable needed to connect Host computers to the switch? Why or why not?
What equipment is necessary to set up networking in an office?
There are a few essential components needed to successfully set up a network for an office. The most important components will be an Ethernet router. The size of the router and the number of ports will depend on the amount of people that will be connected to the router. Ethernet cabling is also essential to connect the computers to the router. Connecting the router to a modem is also necessary in order to connect all the computers on the network to the internet.
Why browser is needed to connect computers into a network?
to be able to own in 2v2 arena on WoW. umirin
What Networking Products are needed to hook my three computers together?
You will need a router, whether wireless or plug in to share these three computers together.
What components are needed to make an electric circuit works?
Globe Switch Wires(to connect) power Pack
Have cable modem what is needed to connect three computers to internet?
It depends on model. Some modems come with a wireless router. If yours has wireless interface, you will able to connect your computers wirelessly. Usually what you have is a modem with one LAN port. If you want to connect your 3 computers to the same modem you need to get a wireless router. It will allow you to connect your computers using wireless or cable. Switch in such case might not work because of internet provider policy.
What things are needed for a circuit?
A source of power, a load, and some wire to connect them together.
What are HDMI splitters, do they help?
HDMI Splitters are devices used to connect HD TV's to certain other accessories, such as video game consoles and computers. They are needed to connect to outside entities.
Must you use a hub to connect 2 pcs?
Yes and no. If you want to just directly connect the two pc's together a cross-over Ethernet cable can do this. Cross-over cables are used to connect 2 like devices. Doing this will most likely require you to disconnect from the internet, unless your computer has 2 NIC's (ethernet ports) If you want to connect both computers together AND still have internet access a hub, or switch, or router is needed. Thus creating your own LAN
What components and cables are needed to connect 4 computers?
for connecting 4 computers you would need a "hub"(en.wikipedia.org/wiki/Network_hub), and a cat5 cable to connect each computer to the "hub". each computer would also need a "network card"(en.wikipedia.org/wiki/Network_card), alot of modern computers come with a network card integrated so you may not need to purchase it separately.
Disadvantages of computers in the past?
Computers of the past were very slow, very limiting, very power consuming, and very big. Computers back then was about the size of a room, and had less speed than a Pentium 1 CPU, these computers usually needed manual configuration, by physically moving components around.
How do you connect a laptop to a desktop computer so it can be used as the only desktop monitor both computers are HP and have Windows 2000 what connector is needed and is software required?
== ==
