Your owners manual will contain the answer. If you don't have one, a salvage yard is a good place to find one. You can also order one from your local dealer.
It's not in owner's manual. It tells you to refer to your Chrysler sound system manual.
This worked on a 1991 Plymouth Voyager SE with AM/FM stereo (no cassette or cd, etc.).
1. Turn the radio on, a station frequency should be displayed.
2. Press the SEL button once to display the time. If the time is already displayed, you can skip this step.
3. Press the SET button once, the display should show 'P'.
4. Press the SEL button once and the hour should be displayed. If the hour is incorrect, turn the tuning knob clockwise or counter-clockwise to adjust it.
5. Press the SEL button and the minutes should be displayed. If the minutes are incorrect, use the tuning knob to adjust.
6. Press the SEL button once. The time you set is displayed. If you made a mistake, just return to step 3, otherwise you are finished! (You may press the SEL button to return to the frequency display if you like)
uhm i dont think you can set an alarm clock, but you can have a clock on your zune. go to settings and scroll till you see clock, click 'show clock' to yes and set the time to either 12 or 24 hour setting then set your time
The crew of the Voyager do eventually get home. In the last fight with the Borg in "Endgame II" Janeway takes the voyager to Transwarp through the Borgs Transwarp hub. This is episode 172 and the stardate it is set on is 54973.4.
The Time Dragon Clock
In The Yellow Avenger, a mission says that you need to set the alarm for tomorrow. If you go to SpongeBob's house, and go upstairs and go to his clock, you will see a piece of paper beside the clock after you zoom in automatically. You then set the big hand to the 45 (shown as 9 on an analog clock like SpongeBob has), and the shorter one to move away from the clock and see if it says "mission complete" on the screen. If it doesn't do anything, you need to set the lcok more accurately.
press and hold the clock button then push the seek/scan to change
This information can be found in the owner's manual. This information can be found in the owner's manual.
If the clock/radio is anything like the one on the '93 Plymouth Voyager, here is how you set the clock: First turn on the radio, then press the set button. When it shows the "P" hit the select button, and it should change to just hours. Turn the Tuner knob to forward or back to set the time you want. Hit the Select button again to go to minutes, and do the same thing with the Tuner knob. Hitting the select button a third time will save the clock settings. ..
you will need a c-clamp and screwdriver and ratchett set.
It is computer controled and not adjustable.
Believe it or not, you need to have a casette in the casette player. If you use the casette that cam with the car, it has audible instructions. Now, here's one for you- where is the fuse for the overhead console that protects the compass and drive time features?
The airbag computer has detected a malfunction and set a code.
there is 2 very small black buttons right above where the time is displayed. The one on the left is hour and the one on the right is minute. you have to us something with a small tip to change time like a pen head.
Turn on the power knob for the radio/clock. Wait until the clock display shows up. Press "set", and use the "scan" and "seek" buttons to set the time. Hope this helps!
Push the set button then use the seek and scan buttons on the radio
Which engine?? Buy a service manual from your local parts store and line up the marks.
The computer detected a malfunction, set a code, and went into limp mode.
unhook - side of the battery and let set 5 mins and reconnect and the light will go out.