0
The minimum and maximum possible value is defined by the tolerance. To calculate the range of the resistor, simply add or remove the amount of the tolerance.
For example, a 100Kohm resistor with 5% tolerance can range from 95Kohm through until 105Kohm.
The lower the tolerance, the more accurate the resistor is.
What else can I help you with?
How can you use the zeros of a function to find the maximum or minimum value of the function?
You cannot. The function f(x) = x2 + 1 has no real zeros. But it does have a minimum.
Minimum CRR LIMIT?
there is no minimum limit of CRR in India but the maximum limit is 15%
What are the maximum and minimum dimensions for pebble?
0.004 to 0.06
In roughness measureing system what is RMS value?
RMS value is defined as "The amount of ac supply required to make same heat effect in resistor , which is made by dc current, in that resistor"
Why you use resistor with variable resistor?
Often we want to easily change a resistor value, so we use a variable resistor. For example, we may want to change the resistor that controls the power sent to a LED, so we can easily make it brighter or dimmer. Often if we use a variable resistor, there is only a very narrow range that is useful. Continuing our example, sometimes we use several LEDs, and we use the variable resistor to set them all to the same brightness. In this case, the resistance range that sets the LED to be twice as bright as the the other LEDs, and the resistance range that sends so much power to the LED that it is permanently destroyed is even less useful. So we add a fixed resistor in series with the variable resistor -- the fixed resistor sets the minimum net resistance, no matter how we turn the knob on the variable resistor. In our example, the addition of the fixed resistor allows us to turn the variable resistor throughout its whole range, and the LED gets brighter and dimmer; without that resistor, a certain range of the knob on the variable resistor would allow so much power to go to the LED that it would be destroyed.
What is a minimum value of a polynomial?
There is no minimum (nor maximum) value.
How would you describe the spread for a dot plot?
The spread is the minimum value (not count) to the maximum value. The range is the maximum value minus the minimum value. Spread does not consider the frequency of the values, only the minimum and maximum.
What is maximum value and minimum value?
pi value= 1
Can standard deviation value be bigger than maximum and minimum value?
No standard deviation can not be bigger than maximum and minimum values.
Which is less a maximum or a minimum?
A minimum refers to the smallest possible value or quantity in a set or range, while a maximum refers to the largest possible value or quantity in a set or range. So, a minimum is less or smaller than a maximum.
How do you find minimum and maximum value of calculus?
In Calculus, to find the maximum and minimum value, you first take the derivative of the function then find the zeroes or the roots of it. Once you have the roots, you can just simply plug in the x value to the original function where y is the maximum or minimum value. To know if its a maximum or minimum value, simply do your number line to check. the x and y are now your max/min points/ coordinates.
This is the difference between the maximum and the minimum value in a data set.?
The difference is that the maximum is normally larger than the minimum.
What is a resistor that can be adjusted between minimum and maximum by turning a dial is called a what?
It is a variable resistor. Basically, the same as when you turn up or down the heat on an electrical oven or radio.
What is an extreme value in a set?
the maximum or minimum value of a continuous function on a set.
What is the mode the maximum minimum and the range?
The mode is the value that appears most frequently in a data set. The maximum is the highest value, while the minimum is the lowest value in that set. The range is calculated by subtracting the minimum from the maximum, indicating the spread of the data. Together, these measures provide insights into the distribution and variability of the data.
How do you find the range and domain of a graph function?
Assuming the standard x and y axes, the range is the maximum value of y minus minimum value of y; and the domain is the maximum value of x minus minimum value of x.
A 100 ohms resistor carries a maximum current of 400mA what is the minimum power rating this resistor should have?
To find the minimum power rating of a resistor, you can use the formula ( P = I^2 \times R ). Given that the current ( I ) is 400 mA (or 0.4 A) and the resistance ( R ) is 100 ohms, the power is calculated as ( P = (0.4)^2 \times 100 = 16 ) watts. Therefore, the minimum power rating for the resistor should be at least 16 watts to handle the maximum current safely. It's advisable to choose a resistor with a higher rating for added safety and reliability.
