There are many different styles colors i would suggest taking classes or order some nail art books that gives you a step by step procedure
You can achieve glowing skin at home by following a consistent skincare routine, maintaining a healthy lifestyle, and using natural remedies. Here's a step-by-step guide to help you get glowing skin at home:
Crackle nail polish basically has alchohol in iit. The alcohol makes the nail polish crackle, because of the chemicals in it. Crackle nail polish can also be done at home. Materials: 1) 1 bottle of nail polish (colored nail polish perferred) 2) 1 bottle of alcohol Procedure: Step 1) open the bottle of nail polish Step 2) open alchol, and poor 1 cap of alcohol into 1 bottle of nail polish Step 3) shake up the nail polish Step 4) apply to nails with nail polish on it. It takes a few secs to start to crackle. And wala! There u go homemade crackle nail polish!! ;)
If you step on a rusty nail then you would have to get a tetanus shot
When you step on a nail, the withdrawal reflex is initiated. This reflex causes you to quickly remove your foot from the source of the pain to prevent further injury.
One can find information as to how to matte nail polish when one goes to the websites of amazon and youtube. On these sites, there are step-by-step guides as well as illustrations that help one with matting nail polish.
Items needed: Tape(scotch whatever), Disposable cup, Nail polish(about 2-4 colors or more) You have to do it quick or else it won't turn out very nice. Step 1: Fill a disposable cup with water(about half) Step 2: Add just a drop of nail polish from the brush(let it drop off the brush[put one color first then put another color inside that first color, it should spread out]) Step 3: Get a tooth pick and make a design in the nail polish. (this step you must do relatively fast or it will create a "skin" on the surface of the water) Step 4: Tape your finger around the nail and dip it in the middle of your design Step 5: Leave your nail in there for about 10 seconds Step 6: Turn your nail so that it's in the water and your nail is facing upwards. Step 7: Lift your nail slowly out. It might take a while for the design to come out but it turns out really pretty. HOPE THIS HELPS =))))))<333333
Step 1 File. File the chipped area of nail polish very gently to smooth it out. Use a file with a fine grit, make sure it' is not a coarse grit file. Step 2 Dip a q-tip in nail polish remover and squeeze it out so that it is not soaked. Lightly rub the q-tip over the chipped area being careful not to remove too much polish. This will smooth the polish around the chipped area. Step 3 Use a small amount of the colored nail polish to fill in the area. Step 4 Apply a thin coat of colored nail polish to the entire nail. Make sure you allow plenty of time for the nail to dry. Don't use a quick dry product. Step 5 Clear Coat. Apply a coat of clear polish to the entire nail and allow it to dry completely on it's own.
no you should tend to your wound first
don't know what you mean by step by step process, but I can say with confidence that a screw will almost always hold better.
You could get an infection from all the germs;if their is rust on the nail you could also get lock-jaw, unless you have had recent shots for it.
Be no the safe side and have a tetanus shot.