50m working. 100m sleeping
The Substation which comes power from the power plant know as pooling substation.
A substation that is smaller than the average substation. A substation converts electric power from one voltage to another.
A substation is not a load but is a place where switching and voltage-level changing takes place. Accordingly, you cannot apply a 'power factor' to a substation.
LOok at ur book
Pole mounted Outdoor
A power substation is used to reduce the voltage from high voltage power lines to a voltage that is less dangerous that you can use in a house for example. It is less costly to transmit electrical energy over long distances using high voltage.
this type of substation are considered important because any sort of disturbance in these substation may lead to the failure of grid.this type of substation are used to transmit huge amount of power from one point to other point in the gridAnswerA substation is a location where electricity transmission/distribution voltage-levels are changed and switching is carried out, as opposed to a power station, where electricity is generated. A substation, therefore, is a yard/building in which there are transformers, switchgear, busbar systems, and protection systems.A grid substation is part of the electricity grid system -i.e. part of the transmission system. In the UK, this involves voltage levels of 400 kV, 275 kV, and 132 kV.
this type of substation are considered important because any sort of disturbance in these substation may lead to the failure of grid.this type of substation are used to transmit huge amount of power from one point to other point in the gridAnswerA substation is a location where electricity transmission/distribution voltage-levels are changed and switching is carried out, as opposed to a power station, where electricity is generated. A substation, therefore, is a yard/building in which there are Transformers, switchgear, busbar systems, and protection systems.A grid substation is part of the electricity grid system -i.e. part of the transmission system. In the UK, this involves voltage levels of 400 kV, 275 kV, and 132 kV.
its a type of conductor that carries electric power
Many substation transformers have three windings - the primary, secondary, and tertiary. The tertiary bus is the bus connected to the tertiary of the transformer. this is often used as station power for the substation, since the tertiary is very often a distribution level voltage (2 - 15kV).
Prefabricated power distribution substation Its basically a whole 11kv substation but in one unit. It contains a transformer, ring main unit, fuse board and circuit breakers etc. It still uses as much space as a normal substation that houses a separate transformer, ring main unit etc but is easier to transport and is probably cheaper.
Batteries are essential components in a substation. They provide the (tripping) current by which protective relays can trip high-voltage circuit breakers in the event of a fault. This means that the circuit breakers can trip even if the substation itself has lost its ancillary AC power supply.