0
Still curious? Ask our experts.
Chat with our AI personalities
Steve
Jordan
ProfessorAdd your answer:
Earn +20 pts
What key combination can you use to switch between open application?
Alt + Tab usually works in Windows and Linux.
What is the difference between pressing alt plus tab and ctrl plus alt plus tab?
The CTRL key is the only difference. What it actually does depends on the currently active program and/or control, and whether or not the key combo has been implemented or not. If not, the shell processes the key combo. On my system (Windows 7), both combos bring up the task switcher.
How do you change the code on a vintage American tourister escort train case?
Easiest to remove the lock via 2 Phillips screws inside. Screws allow a trim ring to come off and the lock set will push through the front of the lid. Have lock open and set to current combo. There may or may not (fallen off) be a red fiberboard tab inside. Remove tab if necessary and slide the piece it is holding in place over and down. Adjust the combo to whatever you want, move the metal piece back to lock the combo in, and re-install the red tab if desired. Test combination BEFORE replacing lock. Installation is reverse of removal. Good hunting.
Does Bupropion HCL 150MG 12HR sa tab have THC in it?
No. It only contains "bupropion" as a salt.
A location on the horizontal ruler that tells Word where to position the insertion point when you press the TAB key is called a .?
These are tab stops. In Microsoft Word you can create a tab stop by clicking and dragging on the horizontal ruler, where they appear as flipped-over black L or T marks. If there are faint marks below the ruler at 1-inch intervals, these are the default tab stops.
How do you reset a Bell bike lock combination?
I had the same problem. Shame on Bell for not posting the instructions readily on line. You must hold the red button on the inside of the mechanism down, while resetting the combination. I wanted to post to improve upon this answer. I just got off the phone with Bell customer service. Here is what you do: Open lock Turn end that has the numbers on it (where you set the combo) towards you so that the open part where the other side slides in is facing you. Notice there is a red "tab" at the top of the opening. Press that red "tab" IN and DOWN (Note: It will be VERY hard to do this. You have to push IN very very hard, then while holding it in, slide it DOWN until you hear a click) Now set the combo to whatever you want it to be. (Write it down if you think you may forget!) Look once again at the end of the combo side of the lock so you are looking at the opening where the other side slides in. There is a black tab on the bottom of the opening. Press that tab UP until it clicks. Now you should be able to slide the other end of the lock in and "locK' the lock and unlock it using your new combo.
How can you move the insertion point into the next text placeholder by pressing which keyboard shortcut keys?
Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.Use the Tab key.
How to use python programming to make graphing xy charts?
try using this code: import pygame def main(): (tab)screen = pygame.display.set_mode((750,750)) (tab)pygame.display.set_caption("graph") (tab)screen.fill((255,255,255)) (tab)pygame.draw.line(screen, (0, 0, 0), (375, 0), (375, 750)) (tab)pygame.draw.line(screen, (0, 0, 0), (0, 375), (750, 375)) (tab)pygame.display.flip() (tab)while True: (tab)(tab)x = raw_input("x: ") (tab)(tab)if x 'q': (tab)(tab)(tab)pygame.quit() (tab)(tab)(tab)break (tab)(tab)print '' (tab)(tab)screen.fill((255,255,255)) (tab)(tab)pygame.draw.line(screen, (0, 0, 0), (375, 0), (375, 750)) (tab)(tab)pygame.draw.line(screen, (0, 0, 0), (0, 375), (750, 375)) (tab)(tab)try: (tab)(tab)(tab)pygame.draw.circle(screen, (0, 0, 255), (int(x) + 375, -1 * int(y) + 375), 3 ) (tab)(tab)except: (tab)(tab)(tab)print "graph error, please enter valid x,y coordinates" (tab)(tab)pygame.display.flip() main() pygame.quit() this code makes a simple grapher.unfortunitly when I typed this answer, the tabs don't show up so I had to do this instead. any time it says "(tab)" just insert a tab there instead.
I set options on counter srtike condition zero to play windowed and now i cant see any of the options to set it back to full screen anyone help?
go to options>>video tab and uncheck windowed below your renderer combo box
What do the initials TAB stand for in the TAB injection?
what do the initials TAB stand for in the TAB injection
What is a active tab?
An Active Tab Is When Someone Has A Open Tab
What is the view tab?
tab to view
