Just put it in the slot, and make sure the pins on the ram line up with the pins on the slot. When you push down on it, the pins on the side of the slot should snap down over the RAM. If they didn't you either didn't push hard enough, or have it in backwards. Here is an image http://img108.imageshack.us/img108/1851/ramjx1.jpg
if the horse pins its ears back it is mad but if it is just moving them back and forth that is OK
on top of headlight assembly are 2 plastic slide pins, pull up on these to release assembly. when putting back on. push in on assembly to put slide pins down to hold assembly in.
No why would they?
put pins in the radio bend out ward and pull
Pins should never be put in backwards
You can put your hand over their ears or put your hand on the back of their ears to block the water.
curiosity Why did the kids put beans in their ears? No one can hear with beans in their ears. After a while the reason appears. They did it cause we said no.
no,you only put earrings in your American girl dolls ears is if it comes with pierced ears.
Yes
Put the car on jack stands and remove the wheels. Locate the calipers and brake pads and remove the pins and clips from the calipers. Slide out the old brake pads and push the piston back to make room for the new pads and shims. Slide in the new pads and shims and put the pins, clips and cotter pins back in. The front and rear replacement process are very similar, but have different pads and shims.
You can use push pins, thumbtacks, or staples to put a paper up on a bulletin board.