0
Add your answer:
Earn +20 pts
What is minimum drum thickness on 1993 f250?
It will be stamped on the drum
How do you draw drums?
OK I'm a fairly good drawer so to make a very easy yet impressive drum dram a rectangle have it be up like it would be. next make it look 3d by drawing a half circle in the drum at the very top like you would to make a 3D cup. Finally and designs and you have a very easy drum now to draw a easy drum set draw a big circle that is the center of the drum the one with the foot petal. Next to it draw a line straight up then ad to little lines on the bottem of the line there you have a stand and your going to color in a blob on the top and then you have a symbol. have a line sticking out of the foot petal drum then make a drum like the bongos but round of the eges do that twice. To draw a simple drum, draw an oval (horizontally stretched circle). Draw another oval exactly the same size below it and slightly to one side. Connect the sides and erase the part of the lower oval that would not be seen. Draw bands (rims) around the top and bottom.
If a man draw half a liter oil from a twenty liter drum which is exactly half full what percentage of the content of the drum does he draw?
5%=one twentieth
How many drums in the smallest type of drum kit?
I suppose minimum would be a bass drum, snare drum and hi-hats
What is a drum rim?
It is the metal part around the outside of the drum that is around the drum head.
How do you draw on your bass drum?
I'm disgusted that anyone would even try to degrade a perfectly good base drum!
How much are drummers?
Do you mean drum kits? if so then about £200 minimum
What is the minimum amount of turns of wire rope to remain on a drum?
The minimum amount of turns of wire rope to remain on a drum is typically 3-5 full wraps to prevent the rope from slipping or coming off the drum during operation. The exact number may vary depending on the size and type of drum, as well as the specific application.
How does a drum set factory work?
a drum set works through a musical percussion that vibrates tickling the drum chin therefore forcing a solid vibration sending a noise unit to the left creating sound and a drum. a drum set works through a musical percussion that vibrates tickling the drum chin therefore forcing a solid vibration sending a noise unit to the left creating sound and a drum.
What Minimum change in set up to increase velocity ratio of single purchase crab?
To increase the velocity ratio of a single purchase crab mechanism, you can change the ratio of the radii of the drum that the rope wraps around and the radii of the axle around which the crab rotates. By increasing the radius of the drum relative to the axle, you can increase the velocity ratio. This can be achieved by either increasing the diameter of the drum or decreasing the diameter of the axle.
What is the difference between drum plotter and flatbed plotters?
the main difference is: in drum printer paper and pen(which r used to draw on paper and it can be one or more than one) moves simultaneously to draw..the movement of drum gives vertical positioning and movement of pens give horizontal positioning. but in flatbed..paper does not move..all the movement is done by the pen and able to draw complex graphics..
What is the minimum number of wraps left on the drum when the hook is in its lowest position?
2 wraps
