0
Gravel suppliers use a conversion rate of 1.75 tonnes per cubic meter of loose filled 20 mm crush but depends on the type of rock and how dry it is. Dry gravel with little or no fines has a density of 1.5 tonnes per cubic meter. When the gravel is compacted it compress by about 20%.
Add your answer:
Earn +20 pts
Gravel sandstone and conglomerate are all types of?
Gravel, sandstone, and conglomerate are all types of sedimentary rocks.
Which is a better insulator water or gravel?
Depends what's in your gravel. In order of best to worst: Sandstone 1 Limestone Concrete Water Soil ref:http://en.wikipedia.org/wiki/List_of_thermal_conductivities
What would you use to separate a mixture of pebbles and gravel?
your eyesight
What are tiny pieces of broken rock?
it is call lemstorne
What are the properties of road salt?
I think road salt it made of salt, gravel and sand. The salf lowers the melting point of the snow/ice, so therefore melting it, and the sand and gravel give a car grip.
If you spread 20MM of gravel over 2860M2 area how many cubic meters will you need?
1 cubic meter of grave contains 50 square meters at 20mm depth (1000mm / 20mm = 50). 2860 / 50 = 57.2 So you need 57.2 cubic meters of gravel.
What is the Unit density of gravel?
The unit density of gravel can vary depending on the type of gravel. Generally, the unit density of gravel ranges from 2,000 to 2,900 kilograms per cubic meter (kg/m^3).
What is the density of gravel 500 mm?
The density of gravel can vary depending on the type and size of gravel. On average, the density of gravel is around 1.4 to 1.6 grams per cubic centimeter (g/cm^3). It is recommended to check the specific density of the type of gravel you are using for accurate measurements.
What is the density of gravel?
The density of gravel can vary depending on the size and type of gravel. On average, the density of gravel is typically around 1.4-1.6 g/cm³. It is important to note that this value can fluctuate based on factors such as compaction and moisture content.
What the density of gravel?
AnswerThe density of gravel varies depending on many many things. For one there is packed and loose density. Next the density varies much of how many fines and coarses (sand and rock) are in the gravel mixture. There are many ways to find the density of gravel but takes a little know how. So there is no definite answer to this question.The density of compacted gravel will vary from 2100-2300 kg per cubic meter.
What is the density of aggregate of 20mm?
1.5 tonnes per Cubic metre.
How many cubic meter of gravel equal to 1 ton of gravel?
Ah, what a lovely question! You see, the amount of gravel in a ton can vary based on the size and density of the gravel. On average, about 0.74 cubic meters of gravel is equal to 1 ton. Just remember, it's all about finding the right balance and harmony in your gravel calculations. Happy graveling, my friend!
What is the sound of gravel?
The sound of gravel can vary depending on factors such as size, shape, and density of the gravel, as well as the surface it is on. Generally, it is described as a crunching or grinding noise as the gravel particles move and rub against each other.
Does gravel float or sink in water?
No, it does not.
How do you convert pea gravel from weight to cubic meters?
First, you need the density of pea gravel. This depends heavily on particle size and cleanness of the gravel, but a density of 3000lb/yard3 is a realistic estimate. If you want the final answer in metric, it's useful to convert the density to 1780kg/meter3. Knowing this density, you can use it as a conversion factor. You just take the mass of your Pea gravel (for example 50kg) and multiply it by 1 meter3/1780kg to make the units cancel out. Or if you want it easy, just take the weight of your pea gravel in kilograms and divide it by 1780 to get volume in cubic meters. This is a very rough estimate, and actual values depend on the density of the pea gravel being used. The basic idea for any conversion is that you get the density and make sure it uses cubic meters.
What is heavier gravel clay or sand?
Gravel is typically heavier than sand, and therefore gravel would be heavier than both clay and sand. This is because gravel consists of larger-sized particles and has a higher density compared to clay and sand.
What is the weight of a cubic meter of concrete?
mass = density * volume weight = mass * acceleration due to gravity W = (2400 kg/m^3)*(1 m^3)*(9.8 m/s^2) = 23520 Newtons convert to pounds 23520 Newtons = 5287.5 lbs (note 1 lb is approximately 4.448 Newtons)
