what is the density of 40mm coarse Aggregate
4cm
no 4cm converted to mm is 40mm therefore it is smaller the 500mm
40mm = 1.575 inches.Direct Conversion Formula40mm*1 in25.4 mm=1.57480315in
crushed limestone. Has rocks and lots of dust and compacts well
0.6705 TN/Y^3 is the density of Class 2 AB at 95% compaction. Therefore, there are 1.491 cubic yards of Class 2 AB in 1 ton at 95% compaction.
1400kg/m3
The weight of stone aggregate varies based on its density, but a general estimate is that a cubic meter of 20mm, 40mm, and 10mm stone aggregate typically weighs around 1.5 to 1.7 tons. For example, 10mm aggregates are closer to 1.5 tons per cubic meter, while 20mm and 40mm aggregates can weigh slightly more, up to 1.7 tons. The specific weight can vary based on the type of stone and moisture content.
The density of course aggregate is 1560 km/ m^3. The density of something can be found by dividing the mass by the volume.
2.64
If by aggregate you mean the 'rock' mixed in to make concrete, then the density is usually about 2.7 g/cm3 .
The density of 5mm aggregate typically ranges from 1,500 to 1,800 kg/m3. This may vary depending on the specific composition of the aggregate and any air gaps present.
For plain cement concrete, the aggregate used is of size 20 mm. For RCC structures, it is 40mm and for roads, it is 80mm
5
The weight of 10mm aggregate varies based on the density of the aggregate material. On average, the weight can vary between 1400 to 1600 kg/m3, so for a specific weight, you would need to know the density of the aggregate material being used.
density of send and aggrigate
You convert everything to compatible units (volume should be in cubic meters or in liters), find the density of aggregate, and multiply the volume by the density to get the mass.
The density of 12mm coarse aggregate typically ranges between 1,500 to 1,800 kg/m³ (or about 94 to 113 lb/ft³), depending on the type of material and its moisture content. Factors such as the specific gravity of the aggregate and the presence of impurities can influence the actual density. For precise applications, it's advisable to measure the density of the specific batch being used.