use the fine adjustment knob to get a better view of what you are looking at.
For low power you can use the coarse adjustment and fine adjustment
for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
First put the specimen into focus using a low power lens, then switch to a higher power lens if needed.
Begin by using the lowest power objective lens and then switching to the next highest power lens.
The lower power objective for the microscope is the small lense on the microscope. The size usuall ranges at 4x on the microscope.
Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens
the diameter of the high power field microscope is 500 micrometers
When using a microscope under high power, you typically start by locating the specimen using the coarse adjustment knob on low power before switching to high power for a more detailed view. Under high power, you may need to use the fine adjustment knob more delicately to focus due to the increased magnification. Additionally, the field of view is smaller under high power compared to low power.
For low power you can use the coarse adjustment and fine adjustment for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
First put the specimen into focus using a low power lens, then switch to a higher power lens if needed.
Begin by using the lowest power objective lens and then switching to the next highest power lens.
First put the specimen into focus using a low power lens, then switch to a higher power lens if needed.
The lower power objective for the microscope is the small lense on the microscope. The size usuall ranges at 4x on the microscope.
The magnification power refers to the enlarging power of a microscope. A microscope basically magnifies objects that are placed under the slides.
To turn on a microscope, first ensure that it is plugged into a power source. Then locate the power switch, usually at the base of the microscope, and turn it on. Allow the microscope to power up fully before using it.
In a compound Microscope, Power Switch turns on the lamp( Light source)
The term that refers to the power of a microscope is "magnification." Magnification indicates the degree to which the image of an object is enlarged when viewed through a microscope, providing details that may not be visible to the naked eye.
On each lens of a Microscope there is a marking that states the magnification power.
A dissecting microscope typically has a magnification power ranging from 5x to 40x.