0
Add your answer:
Earn +20 pts
How do you connect your old xbox 360 controller to your new xbox 360?
You just press the little button on your Xbox 360 and press the one on your controller when it is on
Can you do cheats with old Xbox games on a new Xbox 360?
Yes, but instead of pressing the black and white button from the original xbox controller you press RB and LB on the xbox 360 controller.
Do white xbox 360 wireless controllers work with the new xbox 360?
It is 4 controllers on every Xbox 360.
Can you play old Xbox games on the new Xbox 360?
Yes, It Is Possible To Play Old Xbox Games On An Xbox 360, However, You Cannot Play Xbox 360 Games On An Original Xbox.
Can you put a Xbox 360hardive in foreign Xbox 360?
Yes, all hardware for xbox 360 can be used on any xbox 360... except if it is the new xbox s... I'm not so sure with that one...
How do you get the Xbox 360 controller to work on the new Xbox 360?
On the top of the controller there is a small sync button press and hold that then press the same button on the front of the new console then the connection player sign will show player one.
How do you hook up an Xbox 360 controller to another persons Xbox?
If you look on the front of your 360 console, you should see a small white button next to the Memory Unit B port. If you press this button, the lights around the power button should start to blink or rotate. This means that the XBox is looking for a new controller signal. Hold down the power button on the controller for a few seconds and it should sync with the console. After that you should be good to go.
How do you connect your old xbox 360 controller to your new xbox 360?
You just press the little button on your Xbox 360 and press the one on your controller when it is on
Why does your xbox 360 controller disconnecting?
If it's a wireless controller, check the batteries, try new batteries. Or maybe the controller is not set to your xbox 360, press the little round button near the memory card slots, and then press the really small button on the top of the wireless cotroller. If you mean the old xbox or non-wireless cotrollers then I don't know
What do you do if your xbox shocks people every time they touch it?
I guess you have the new Xbox 360 S. There are 2 buttons which are censored, these are power button and sync button, both buttons when pressed make a bing noise. You will know all this anywho. You cant really do much when people are shocked about what your xbox can do.
How do you re sync Xbox 360 controller?
theres a small button at the top of your xbox 360 remote with a small beam time picture next to it and there is also one on the front of your xbox.. if you press these at the same time and hold them down you should be able to connect the controller to a new xbox without any problems .. this may take 10 seconds to connect so be patient :D
What do you do when your xbox 360 has three red lights around the power button?
get a new xbox (its dead)
Is it possible to repair an Xbox 360 Wireless Controller The controller was thrown and no longer syncs to the Xbox console Is it possible to do a solder reflow on the wireless chip using a Heatgun?
Maybe the sync button is damaged. Its best to just buy a new one.
How do you fix your sprint button for black ops on xbox 360?
get a new controller
Can you do cheats with old Xbox games on a new Xbox 360?
Yes, but instead of pressing the black and white button from the original xbox controller you press RB and LB on the xbox 360 controller.
You have Xbox 360 controler you wont to use it with your new Xbox 360?
Well, if you look at the top of your controller there should be a tiny button. Turn on your Controller hit that button and then turn on your X-Box 360 and hit the same button that is on the front of your X-Box 360. Wait about 10 seconds and they should be connected.
My Xbox 360 wireless contoller wont connect to your Xbox 360 and ive sync it several times all it does it goes around and around then all 4 rings again can some one help?
ok, press the white button on the left side of the charger port on your controller and hold it till it does the circle circle motion. as soon as it does that, press the sync button on your 360 and wait till the both sync. if that doesn't work, turn off your 360 and try turning it on with your controller. if that doesn't work, turn it off again, attach your plug and play to your controller, put it in the 360 and try turning it on via the controller that way. that doesn't work, disconnect your 360, wait 5 minutes and try the first method again. now if it still doesn't work, try syncing a friends controller to your 360 or your controller to their's. if your controller doesn't sync to another 360, you need a new controller. if no controller won't sync wirelessy to your 360, then either hook up controller via plug and play or wired controllers, or get a new 360.
