A buzzer is any mechanical, electromechanical, electronic, etc. device designed to produce a buzzing sound or vibration when activated. Some examples are:joy buzzer, a mechanical device used for practical jokes that is held in the palm and activated when the jokester shakes hands, causing an unpleasant vibration in the palm of the victim (shown in image above)electric buzzer, an electromechanical device that produces a buzzing noise and activated by connecting to electrical powerpiezo buzzer, an electronic device using the vibrations of a flat disk of piezoelectric material to produce a buzzing noise and activated by enabling it controlling electronic circuit
Smash it with a hammer - or ... DYNAMITE!
Yes, the motherboard (mainboard) of the Xbox 360 is defined as an advanced circuit board. Controllers, remotes and memory cards also have embedded circuit boards.
Because you have blown a fuse or tripped a circuit breaker. This is caused by a) too much equipment plugged into a single circuit, or b) faulty equipment causing a short circuit.
The Speakers get connected to the TV that the console is connected to. So yeah you can purchase a home theater and connect it to your HDTV and when you play the PS3 if everything is connected correctly you will hear it through a number of speakers.
hello my name is my
If a buzzer is connected to an open circuit, it will not receive any electrical current and will not produce any sound because the circuit is incomplete. In an open circuit, there is a break in the path, so the electric current cannot flow to power the buzzer.
If a buzzer is connected to an open circuit, no current can flow through the circuit and the buzzer will not receive any power. As a result, the buzzer will not produce any sound and remain silent.
the buzzer wont buzz
the circuit would not be complete. the lightbulb would not light or the buzzer would not buzz
A buzzer is cool. You just connect the circuit.
Sure. If you want sound when the circuit is energized, use a buzzer. If you want a visual indication when the circuit is energized, use an LED.
I bought: reed switch LED Buzzer Button (On/Off) Resistor (if necessary) I connected: <---Button------Reed switch------Resistor (if necessary)------LED------Buzzer---Batteries--->
When electricity goes through it it buzzes
To make a buzzer sound louder on a circuit, you can try increasing the voltage supplied to the buzzer, using a heavier duty buzzer that can handle more power, or adding a transistor amplifier to boost the signal. Be cautious not to exceed the buzzer's voltage and current ratings to avoid damaging it.
series resonant circuit
Current stops flowing.