It is wireless and not connected.
You need a wireless controller adapter for your pc. You can find one on amazon.
The Xbox 360 controller uses a proprietary wireless technology to connect to the Xbox 360 console.
To connect your wireless controller to your console:Press and hold down the Xbox Guide button or the Startbutton until the controller turns on.If your console is not on, press the power button to turn on the console.Press and release the connect button on the console.Press and release the connect button on the controller.After the Ring of Light on the controller and console spin and flash once, the controller is connected. The quadrant that remains lit indicates the controller's position.To connect, or bind, additional wireless controllers, repeat this procedure for up to four controllers.To disconnect a wireless controller, press and hold the Xbox Guide button for three seconds, and then turn the controller off.
a wired controller there is something called xpadder. And for wireless controllers you have to buy a adapter
The simple answer is you cannot connect a wireless controller to a PC with just the recharge kit, you will need to buy a wireless controller dongle, or a wired controller if you wish to use an Xbox 360 controller on you PC.
It is wireless and not connected.
You need a wireless controller adapter for your pc. You can find one on amazon.
Yes.You need a wireless reciever.Check Wal-Mart or other store that sell that type of hardware.
press Connect on the controller then FC1 on the receiver and it will connect (providing u have plugged the receiver in and turned your ps2 on
yes it is possible
yes.
It should because it uses bluetooth to connect to the ps3
The Xbox 360 controller uses a proprietary wireless technology to connect to the Xbox 360 console.
To connect your wireless controller to your console:Press and hold down the Xbox Guide button or the Startbutton until the controller turns on.If your console is not on, press the power button to turn on the console.Press and release the connect button on the console.Press and release the connect button on the controller.After the Ring of Light on the controller and console spin and flash once, the controller is connected. The quadrant that remains lit indicates the controller's position.To connect, or bind, additional wireless controllers, repeat this procedure for up to four controllers.To disconnect a wireless controller, press and hold the Xbox Guide button for three seconds, and then turn the controller off.
a wired controller there is something called xpadder. And for wireless controllers you have to buy a adapter
you need a special adaptor