a star drawn with five lines will give you 10 dots on 5 lines with only 4 dots on each line. (or) simply draw a pentagon and put a cap ( a inverted 'V') on all sides.
draw a five pointed star
Here are the 12 dots, labeled so we can talk about them:[1] - [ 2 ] - [ 3 ] - [ 4 ] -[5] - [ 6 ] - [ 7 ] - [ 8 ] -[9] - [10] - [11] - [12] --- Put your pencil down on #9, and don't pick it up until you're finished.-- Draw line-1 up through #5 and #1, and keep going up for a ways,just far enough so you can do the next step with a straight line.-- Draw line-2 slanting down through #2, #7, and #12.-- Draw line-3 straight to the left, through #11, #10, and back to #9.-- Draw line-4 slanting up, through #6 and #3, and keep going fora ways, until you're exactly straight up above #4.-- Draw line-5 straight down, through #4 and #8 .It all depends on the arrangement of the dots.Besides, there is nothing about straight lines, so used curved lines insteaddistribute the 12 dots around the perimeter of a pentagonSince you didn't specify the lines have to be the same length... Arrange the dots in a grid as follows :-OOOOOOOOOOOOThen - starting at he top left corner, draw a 'square spiral' (doesn't matter whether you go clockwise or anti--clockwise) - this will cover ALL the dots AND use only five lines !See Related Link below for a graphic.It all depends on the arrangement of the dots.Besides, there is nothing about straight lines, so used curved lines instead
it depends where the dots are and its easy just leave your pencil on the paper when joining them up!
TYPEWRITER 10 letters
If correctly placed, only 10 obsidian blocks
To separate 10 dots with 4 lines, you can create a square with 4 dots at the corners and one dot in the center. This arrangement allows each line to intersect with at least 2 dots, effectively separating all 10 dots.
If I am not wrong, no matter how many dots you have in that circle, it will have infinite lines. All circles have infinite straight lines.If you are talking about other lines and not straight lines, then my answer is not applicable.Assuming you mean to ask, "How many times can I connect ten dots on the outer edge of a circle?", then the answer is 42. If you're not connecting dots immediately next to each other, then you can draw only 32 lines.
draw a five pointed star
A standard deck of playing cards contains a total of 52 cards, with each card featuring a varying number of dots (pips) depending on its rank. The ranks from Ace to 10 have 1 to 10 dots respectively, while face cards (Jack, Queen, King) do not have dots. If we calculate the total number of dots from the numbered cards only (1 to 10 in each of the four suits), there are 220 dots in total.
10 is two lines 11 is one dot over two lines 12 is two dots over two lines etc... 20 is one dot over a shell. 21 is one dot over one dot 22 is one dot over two dots etc... 39 is one dot over four dots over three lines 40 is two dots over a shell 41 is two dots over one dot 42 is two dots over two dots etc... 60 is three dots over a shell etc... 80 is four dots over a shell etc... 100 is a line over a shell The Mayan number system is a base-20 system. A dot is 1, a line is 5, and up to 19 you can write in one "digit". As soon as the number increases over 20, it goes up into the second "digit" and you stack a dot (this time multiplied by 20) over a shell shape (worth zero). It's just like our number system, except our number system uses a base-10 system.
Black Dots was created on 1996-10-01.
The answer is to arrange them into a five pointed star. See http://www.puzzles.com/PuzzlePlayground/10in5Rows/10in5RowsSol.htm for an illustration of the solution.
Gary haves 5 dots on both sides so 10 dots in all
The phrase "q fewer lines than 10" suggests that a certain quantity, denoted as "q," represents the number of lines that are less than 10. This means that if you have 10 lines, you would subtract "q" from 10 to determine the actual number of lines, resulting in a total of (10 - q) lines. The value of "q" must be less than 10 for the operation to make sense in this context.
You start by drawing a circle then draw 3+ dots on the circled edge, next connect all the dots with each other but don't go over the same line twice. for a 4 dotted circle you should end up with 6 lines altogether and with 5 you should have 10 lines altogether also 6-15 7=21 10=45 11=55 12=66
210
science