You connect the mixers main outputs to the inputs of the amplifier and the outputs of the amplifier to speakers
here is Speakers > Mosfed > 15 inch 300 watt. 2500 watt behringer euro. 4 box. 2x2. 18 inch 600 watt. 4500 watt - 1 soundstanderd. 4 w-bin, 1x1. 4 tweuter 250 watt ahuja empli. Destributar + Crossover Behringer super x pro cx2310. + mixer StudioMaster + Computer. Please Crossover Cannection. Repley me...........
No, you can not hook a Nintendo dsi up to a tv.
How to hook up a studio standard by fisher
ya you can hook it up to any PC or laptop if they are usb enabled. most are.
Where to hook code reader 2002 envoy
With correct cables, yes.
Depending on the Mixer itself, you might hook it up to a multiple of things. DJ mixers are usually connected to 1 or more sources of sound. In most DJing set-ups, these imput items would be turntables or CD players. Depending on the amount of "inputs" the mixer has, you can add a variety of sources. On the "out" connection, the mixer is generally plugged into an amplifier so you will be able to hear the sound that is produced. You might also have a CD burner, PC, or other items connected to your "out" plugs.
hook a ground up to your battery and mount it to the amp and hook it up with a few more things and yea you got it man
it means you can only hook up 4 speakers
To hook up the Technical Pro RX504 integrated amplifier, connect the DVD player's audio output (RCA or optical) to one of the RCA inputs on the amplifier. For your computer, use a 3.5mm to RCA cable to connect the computer’s headphone output to another RCA input on the amplifier. To incorporate the Mackie 16-channel mixing board, connect the mixer’s main output (XLR or 1/4" TRS) to the amplifier’s auxiliary input or line input. Ensure all devices are powered on and set the appropriate input source on the amplifier for the desired playback.
We need additional information. What do you need to hook up to the mixer? Turntables, tape players, CD players etc.
Yes you can, all it needs is a line in signal...... It all depends on the outputs on your board. 1/4" trs balanced or unbalanced, RCA phono or xlr balanced. If you have balanced outputs xlr on the board then I'd use that first.
To hook up speakers to an amplifier, first ensure the amplifier is powered off. Connect the positive terminal of the amplifier (usually marked with a red color) to the positive terminal of the speaker, and do the same for the negative terminals (usually marked in black). Use speaker wire for these connections, making sure to strip the ends of the wire for a solid connection. Finally, power on the amplifier and test the sound.
To hook up an amplifier to your amp, first make sure both devices are powered off. Connect the output of your amp to the input of the amplifier using appropriate cables, typically RCA or 1/4" TRS cables. Ensure that the amplifier is set to the correct input source, and then power both devices on. Adjust the volume levels gradually to avoid any sudden loud sounds.
To hook up a Kinetic Loudspeaker KA 8100, you need an appropriate audio source, such as an amplifier or receiver, that can drive the speaker. You'll also need speaker wire to connect the speaker terminals to the amplifier's output. Ensure that the amplifier's power rating matches the speaker's specifications to avoid damage. Additionally, a suitable power source for the amplifier is necessary if it requires external power.
To hook up a Delco Reverb Model 7284742, first ensure that the amplifier is turned off. Connect the speaker output of your amplifier to the input terminal on the reverb unit using appropriate speaker wire. Then, connect the output terminal of the reverb unit to your speaker or cabinet. Finally, power on your amplifier and adjust the reverb level as desired.
Microphones and guitars on the top, Speakers in the back. :) Seriously, we are going to need to know the model of the mixer (Sunn was made by Fender), since there are literally hundreds of different models.