The combination of water, oil and molasses will have the following order: molasses will be on the bottom, water will settle in the middle and oil will float on the top. Oil has less density than water or molasses.
To convert NM3 (normal cubic meters) to metric tons, you need to know the density of the gas. Once you have the density, you can multiply the volume in NM3 by the density to get the mass in metric tons. The formula is: Mass (metric ton) = Volume (NM3) x Density (metric ton/NM3).
Please specify exactly the type of this fuel to find the density in catalogs.Also kilogram/metric tonne is not a unit for density.Generally petroleum diesel has a density of 0,832 kg/L or 832 kg/cubic meter.
According to scientists, the density level of molasses is 1.4 grams per milliliter. In addition, honey and corn syrup have the same density level.
in the metric system water has a density of 1 g/ml.
kilogram/meter3 is.
Density = about 34.48 g/cm3
The answer is 1,672 tonne (metric ton).
Liter is a unit of volume equal to 0.001 cubic meters. Metric ton (tonne) is a unit of mass, equal to 1000 kilograms. The only time you can find mass from volume, is if you have a specific substance of known density. For example, water has a density of 1 kg/liter =0.001 (metric ton / liter), so if you had 500 liters of water, then: 500 L * 0.001 (metric ton/L) = 0.5 metric tons
To convert cubic meters to metric tons, you need to multiply by the density. Cubic meters to metric tons: 1 m^3 of concrete * 2400 kg/m^3 = 2400 kg or 2.4 metric tons. Therefore, 1 cubic meter of concrete with a density of 2400 kg/m^3 is equal to 2.4 metric tons of concrete.
The unit for density in metric units is kilograms per cubic meter (kg/m^3).
No, metric units are used to measure things, such as volume, mass, density, force, etc.