answersLogoWhite

0

If you have directions telling you to add "5 parts water," it means that you add five times as much water as you add of something else that says to add "1 part."

For example, if you add 1 part syrup and 5 parts water, you might add 100 ml of syrup and 500 ml of water, or you might add 1 liter of syrup and 5 liters of water, or you could add 3.627 liters of syrup and 18.135 liters of water, as long as the water is five times as much as the syrup.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

8 parts bleach to 10 parts water so if you have 15 parts water how much bleach would you need?

The ratio of the mix is 4:5.... therefore you would need 12 parts bleach to 15 parts water.


How do you make a 2 acetic acid solution from 5 acetic acid?

Add 2 parts acetic acid 5% (5 acetic acid or household vinegar) to 3 parts water (or sterile water for irrigation depending ont he need) and you will render 2% acetic acid. parts are whatever volume you want. i.e. if you need 50ml of 2 acetic acid; use 20ml of 5% acetic acid and 30ml of water. or you can set up the allogation method as below. Say you nee 50ml of 2% acetic acid and all you have is 5% acetic acid you do the following with a tick tack toe : To get the 3 parts you take the 5 at the bottom and subtract across the middle (2 percent desired) and the difference is 3. To get the bottom right answer (2parts) you take the difference of zero from 2 and the diff is 2. 0% (water) - - 3 (parts water) - 2% (desired) - 5% (AA) - - 2 (parts 5% AA) with a total of 5 parts (3 parts water and 2 parts AA) you multiple your desired amount versus the fraction of parts for each. example 3 parts water divided by 5 total parts equals 60% times 50ml equals 30ml. 2 parts 5% AA divided by 5 total parts eqauls 40% times 50ml equals 20ml.


How much water if you need 100ml orange squash?

3 parts of water


Where can I find replacement parts for a Coleman 5-gallon water jug?

You can find replacement parts for a Coleman 5-gallon water jug on the Coleman website or at outdoor retailers that sell Coleman products.


How much of water should be add to obtain a solution that is twenty percent antifreeze?

To obtain a solution that is twenty percent antifreeze, you would add 4 parts water to 1 part antifreeze. This means that for every 1 part of antifreeze, you would add 4 parts of water. This would result in a total of 5 parts of solution, with 1 part being antifreeze and 4 parts being water, achieving a solution that is twenty percent antifreeze.


How much parts does the clarinet have?

The clarinet normally has 5 pieces


How much water is in a pail?

A bucket holds about 8 litres.


How much salt you mix to get a ratio of 5 to 95 on 3 gallons of water?

To achieve a salt-to-water ratio of 5 to 95 in 3 gallons of water, you first need to determine the total parts in the ratio, which is 5 + 95 = 100 parts. Since 3 gallons equals 384 ounces (1 gallon = 128 ounces), you would calculate 5% of 384 ounces, which is 19.2 ounces of salt. Therefore, you should mix 19.2 ounces of salt with 3 gallons of water to achieve the desired ratio.


How do you mix 1 part of a solution to 5 parts waterhuh?

To mix 1 part of a solution with 5 parts water, you would combine 1 unit of the solution (like 1 cup) with 5 units of water (like 5 cups). This creates a total mixture of 6 parts, where the solution makes up 1 part and the water makes up 5 parts. Stir the mixture thoroughly to ensure it is well blended. This method is commonly used for diluting concentrated solutions.


You are required to mix a sodium chloride solution with water in the ratio of 2 5 starting with 780ml of sodium chloride solution how much water needs to be added?

To mix a sodium chloride solution with water in a ratio of 2:5, you need a total of 7 parts (2 parts sodium chloride solution + 5 parts water). Starting with 780 ml of sodium chloride solution, you can calculate the total volume needed by finding the equivalent of 7 parts: ( \frac{780 \text{ ml}}{2} \times 7 = 2730 \text{ ml} ). To find out how much water to add, subtract the volume of the sodium chloride solution from the total volume: ( 2730 \text{ ml} - 780 \text{ ml} = 1950 \text{ ml} ). Therefore, you need to add 1950 ml of water.


What are the release dates for The Doctors - 2008 How Much Are Your Body Parts Worth 5-60?

The Doctors - 2008 How Much Are Your Body Parts Worth 5-60 was released on: USA: 1 December 2012


How much mix do you need for a ratio of 1 part mix to 23 parts water when you are using 16 ounces of water?

16/23 parts mix.