If the can were just a cylinder, its dimensions would be 21/2" wide by 413/16" tall. But the can is not just a cylinder. It is tapered at the top and bottom. The top rim is only 23/32" in diameter and the bottom is even smaller at 129/32" in diameter. This is so the cans can stack, of course. The cylindrical middle is 313/16" tall. The upper cone is 11/16" tall and tapers from the middle to the top, leaving 5/16" for the lower cone tapering at the bottom. There is a spherical indent at the bottom of the can (about 3/8" at its deepest) which I did not measure and a tapered cylindrical indent in the top (about 3/16") which I also did not measure. I don't work in the industry, so those measurements may be off a little bit. I just measured a can as best I could with what I had available.
Might be the about 50 feet high showcase bottle at Showcase Mall. On The Strip (Las Vegas Blvd S.) just north of the MGM Grand Hotel-Casino and Tropicana Ave.
In a bottle because the coke in the bottle,the gas carbon dioxide to make it fizz.
The coke bottle was made in china but to this very day they use them in all of the coke factories around the world
3/4 will fit inside of the coke bottle perfectly
it makes it shoot out the bottle, the coke.
Coke bottle
Plastic
Coke.
$1.79
Any red cap bottle of coke, or special cases of coke look at any drinks that there caps say "enter code@ (has a bottle on there) my coke rewards .com" that is going to get you pionts!
whqt is a 1888 coke bottle worth
3g
plastic 20oz bottle = 1.16 per bottle