By shaking it
I have a 2003 Sorento and hopefully for you it is the same. I assume you mean change the Centigrade temp reading to Fahrenheit? Here is the complete wording from the manual: If the battery has been discharged or disconnected, the temp mode will reset as Centigrade. This is normal condition and you can adjust the temp mode from centigrade to Fahrenheit as follows: Press the Temperature "Down button" 3 seconds or more with the "AMB" button held down. The display shows that THE UNIT OF TEMPERATURE IS ADJUSTED TO CENTIGRADE OR FAHRENHEIT. It works as I changed my battery and had the same problem.
To change the temperature display from Celsius to Fahrenheit on a Nissan Murano, press the "Menu" button on the center console or dashboard. Navigate to the settings or vehicle settings option, then look for the temperature unit setting. Select Fahrenheit to switch the display. Finally, confirm your selection, and the temperature should now display in Fahrenheit.
To convert temperature from Celsius to Fahrenheit, use the formula: °F = °C x 9/5 + 32. Simply multiply the temperature value in Celsius by 9/5 and then add 32 to get the equivalent temperature in Fahrenheit.
You would need to replace the thermostat to change your refrigerator from Celsius (centigrade) to Fahrenheit. However, there is no need to change it. Just remember that 0°C = freezing = 32°F.
to change the celsius on display to Fahrenheit, u want to press the econ button on your climatronic, then right after press your auto button right above the econ button, at this time the display should switch to Fahrenheit or Fahrenheit to celcius whichever u prefer....hopes this helps..
Use this equation to convert degrees Fahrenheit (ºF) to degrees Celsius/Centigrade (ºC): (ºF - 32) / 1.8 = ºC
Press and hold the recirculation button. Then press the temperature up ("+") button to switch between degrees Celsius & Fahrenheit on the Climate Control Temperature and Instrument Panel Outside Temperature displays.
0 degrees centigrade is the melting/freezing point for water
To reset the temperature display from Fahrenheit to Celsius on a 2004 Acura TSX, turn on the vehicle and locate the climate control panel. Press and hold the "F/C" button (usually found near the temperature settings) until the display changes from Fahrenheit to Celsius or vice versa. Release the button once the desired temperature unit is displayed. If the change does not occur, consult the owner's manual for specific instructions related to your model.
Hope this helps. On 1999 model beetle, with key on push and hold in hour and minute buttons at same time this will change your temp from Celsius to Fahrenheit.
Use this equation to convert degrees Fahrenheit (ºF) to degrees Celsius/Centigrade (ºC): [°C] = ([°F] - 32) × 0.556
To switch the temperature unit on your multi function display from Fahrenheit to Celsius, consult your vehicle's user manual for specific instructions. Typically, you would navigate through the settings menu on the display panel using the buttons or touchscreen to find the temperature unit setting and select Celsius.