cassette
the take
hes holding a device that makes the leg where holds the hand in the pocket so it moves
It never existed. It is a plot device in the canceled ABC show "Happy Town." That's why they call it a fictional film. It was supposed to provide the underpinning as to what is really happening in Haplin, the fictional town in the show.
The duration of Film - film - is 1440.0 seconds.
Clint Eastwood's "The Gauntlet" (1977) definitely holds the title for most bullets fired in one scene, they pepper a house with so many rounds that it eventually collapses into its own basement!
10x12cm 24x30cm 30x40cm 34x43cm
Periapical Radiographs
anteroposterior
A PA film has the patient facing and parallel to the film.
phosphor
between 0.12 and 0.20. As the film gets older the density will get higher. There is a standard out there that limits the usable film "base fog" density to 0.30.
Reticulation of radiographic film refers to a pattern of fine lines or a mottled appearance that can occur on the film due to improper processing. This phenomenon is often caused by extreme temperature changes during the developing process, particularly when the film is rapidly cooled or heated. It can compromise the quality of the radiographic image, making it difficult to interpret. Proper temperature control and processing techniques are essential to avoid reticulation.
oblique
geometric unsharpness is fixed by setting the focal radius,etc. while radiographic unsharpness consists of both geometric and film unsharpness.
As film screen speed increases, radiographic density decreases. Faster film screens require less exposure to produce the same density as slower film screens. This relationship is important in balancing exposure settings to achieve optimal image quality.
The term is "anatomic landmark." It refers to specific structures in the body that radiologists use as reference points when viewing radiographic images.
Radiographic film typically consists of an emulsion layer (containing silver halide crystals suspended in gelatin), a base (usually made of a flexible polyester material), and an overcoat layer to protect the emulsion. The film may also have an adhesive layer to adhere to the screens used in imaging.