0
What else can I help you with?
What size shoe does Princeton from mindless behavior were?
the famous yet handsome roc royal wears a size 9 in shoes
What UK dress size is Rihanna?
Rihanna USA dress size is a 6 ,so her UK dress size is an 8
What size is Angela bassett?
measurements 34B-25-37 Pants size: 8 (women) www.twitter.com/angiebnews
What size guards does eminem use on his hair?
No. 7 - 7/8" (22mm) on top No. 5 - 5/8" (16mm) midway on the head No. 3 - 3/8" (10mm) at the bottom
What is one direction shoe size?
Niall - 8 Zayn - 10 Liam - 10 Harry - 11 Louis - 10
What is the nominal diameter of a number 8 rebar?
diameter 16
What is a nominal diameter in reinforcement bars?
The nominal diameter of reinforcement bars (rebar) refers to the designated size of the bar, typically expressed in millimeters or inches, which indicates its general dimensions. It is a standard measurement used for specifying the size of rebar in construction and engineering applications, allowing for consistent design and structural integrity. The actual diameter may vary slightly due to manufacturing tolerances, but the nominal diameter serves as a reference for design calculations and specifications.
What is the weight of 5 rebar?
The weight of 5 rebar rods can vary depending on the diameter and length of the rebar. As a general estimate, a standard size #5 rebar (5/8-inch diameter) that is 20 feet long weighs around 15.41 pounds. Therefore, the weight of 5 such rebar rods would be approximately 77.05 pounds.
What mean by nominal size of aggregate?
Nominal size is the size of the largest aggregate in a grading.
How much does 8 mm rebar in kg?
8mm rebar weighs 0.395kg/m
Difference between basic size and nominal size of an assembly?
on the basis of nominal diameter with tolerances is called nominal size, while required size is called basic size
How many y16 rebar in one ton?
The number of Y16 rebar pieces in one ton depends on the length of each rebar. Y16 rebar has a nominal diameter of 16 mm and weighs approximately 1.58 kg per meter. Therefore, in a ton (1,000 kg), there would be around 632 meters of Y16 rebar, which translates to about 63 pieces if each rebar is 12 meters long. For different lengths, the number of pieces will vary accordingly.
How do you measure nominal pipe size?
Measure the inside diameter and that is your nominal size.
What is true size?
it is the nominal size?
Is cold rolled steel actual or nominal size?
It is a nominal size. Sheet and plate steel thicknesses may vary from nominal thicknesses by up to 10%.
How thick is 3 rebar?
3/8" in diameter.
What is the weith 168x27-7 rebar?
You need the size of the rebar involved to calculate the weight. Charts can be found at CRSI.org or Rebarapps.com. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. You need to know the size of the bar to calculate.
