I trhink you mean a normal colour television.
I would like to know about the man who invented Color TV. What profession he had?
No, the television show, The Rifleman, was never shot in color.
Kind of an army green color.
Damon Wayans
The Jetsons
it doesn't its a scam
It is possible to connected a DirecTV receiver to both a computer and a conventional television. However, the receiver is designed to be connected to the television.
A Freeview receiver is a receiver linked to a television broadcaster. In order to access these free-to-air services, one will require a Freeview receiver.
what are the possible fault in colour tv transmitter and receiver?how we can overcome this fault?
I am assuming you have a new HD duo receiver (222k, 622, 722, 722k) or 612 solo receiver that doesn't have a coax connector for TV 1. You need to do 1 of 2 things to enable you to connect the old TV to your receiver. If your TV has an RCA port (yellow, white, and red cable) on the back, you can use that cable instead of the coax from the TV to the receiver. If your TV doesn't have the RCA ports, you need to get an RF modulator to convert the signal from the receiver from RCA to coax.
Where is the ip address located on a direct tv receiver
A satellite TV receiver is needed in order to view satellite programming. Additionally, a satellite dish is needed in order for the receiver to decode digital signals which then allows you to watch TV.
The remote receiver in a television set can be located in an infinite amount of areas. To determine where it is, refer to the owner's manual of the specific television.
can someone take your card and put it in there receiver
A pioneer receiver is an electronic device that can be used to view TV and Radio Stations. It is like a satellite receiver. I presume that Pioneer is just a brand.
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
You may not have your Dish satellite receiver on the correct channel if it is a duo (dual receiver). You will need to tune it to either 60 or channel 73. Also, make sure your power to your Dish Network receiver is on -- for the Dish TV duo receiver, you should see a light for TV2 and TV1.