NAS IP is the IP address of a switch or another type of a radius client.
NAS Port is a little harder to explain, but it is a number that is assigned to the interface authenticating and edge device. Similar to the NAS PORT ID, but not static.
Wiki User
∙ 10y agoWhat is the real difference between NAT and PAT? NAT is a feature of a router that will translate IP addresses. When a packet comes in, it will be rewritten in order to forward it to a host that is not the IP destination. A router will keep track of this translation, and when the host sends a reply, it will translate back the other way. PAT translates ports, as the name implies, and likewise, NAT translates addresses. Sometimes PAT is also called Overloaded NAT
NAS is dating Nicki Minaj
The address of the Port Wentworth is: 102 Aberfeldy Street, Savannah, 31407 2001
Devrim Nas was born on January 10, 1972.
Nasty Nas & Escobar
It is the Network access service
what is the ip address for facebook with port 6555
A full numeric IP address with port number is XX.XX.XX.XX:PPPP where the "X"s are the IP address and the "P"s are the port number.
youtube port
If you are looking for an example of a IP address then a port number, here is one:192.168.0.1:2712192.168.0.1 is your IP address and the : means a port number so :2712 is the port number.This also works on websites. For example: wiki.answers.com:2712Together, the combination of an IP address and a port number is called a socket.
port address in mumbai
Yes. Routers normally have more than one IP address.
malou agasite panulde
A good analogy might be that the IP address is like the phone number for a large company, and the port is like a particular extension within that company.
The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.
check out www.hack-ur-admin.blogspot.com
Source port numbers