residential wiring are called single phase because the 2 phases coming in are one is neutral and the other is line.the neutral has a potential zero with ground and it is to provide a closed path for the current to flow through..the line is having a potential of 230V with the ground and a line together with a neutral is called a phase
A 3-phase motor will not run on single-phase power or if one of the three phases is disconnected. If the motor is not running, there is no back-EMF generated in the coils, and they draw excessive current, thus overheating.
A single gear is called a pinion.
If you have three adjacent houses each with a single-phase supply taken from different phases in a three-phase cable in the street, the total power is equal to the sum of the powers in each of the three phases.
Phase converters are mostly used to convert single phase electricity into multiple phases or to convert multiple phases into one. They are usually installed to provide three phase electricity where an individual may not get it otherwise.
The starting, organizing and preparing, and closing project life cycle stages tend to have aligning phases. The stage of carrying out project work does not align with single phase. Many phases may occur during this stage, depending on the nature of the project The project life cycle is made up of all the project phases.
Her new single is called SkyScraper and its coming out on the 19th July 2011 :)
Most standard residential service is single phase. Therefore, I would say most all residential A/C units are single phase.
The new CD will be coming out in September 29th 2009 and its first single is called ignorance!
A single substance has one phase.
Real estate development includes the construction of residential single-family houses
Residential land is a place where people build single- family homes, multiple family homes, and condos to live there.
A single phase switch only has two screws to connect power One is the source (or panel power coming in) the other is for the load or device requiring power ( power out) this is referring to residential applications.
A three phase motor will not operate on single phase. The motor will run on two phases but will not start. Motors running on just two phases is called single phasing. The line current of the two legs will go high and it is this factor that the motor controller uses to trip the contactor to open the circuit and isolate the motor from the power source.
Laundry
A residential area is a land use in which housing predominates, as opposed to industrial and commercial areas. Housing may vary significantly between, and through, residential areas. These include single-family housing, multi-family residential, or mobile homes.
A single pole dimmer switch in a residential setting allows for adjusting the brightness of lights, creating ambiance, saving energy, and extending the lifespan of light bulbs.
My electric bill comes in the mail and it says residential-multiple, my neighbor bill say residential-single. What does this mean?