0
you would have to measure the rock because all rocks have different densities. it depends on the rock's properties of matter. that will determine what the rock's density is.
Wiki User
∙ 13y ago
Wiki User
∙ 14y agoMass per unit volume of the limestone. Could be easy, could be difficult to answer. What is your take here? Solid 2600 broken 1300
Wiki User
∙ 10y agoCrushed limestone is used for a variety of purposes and comes in sizes depending on need. Three-inch crushed limestone has a density of around 140 lbs. per cubic foot.
Add your answer:
Earn +20 pts
What is the density of crushed concrete?
The density of crushed concrete varies depending on the gradation and quantity of impurities (e.g. asphalt and other) but can be estimated at 1900-1950 kg/m^3.
What is the Bulk Density of crushed concrete?
The density of crushed concrete varies depending on the gradation and quantity of impurities (e.g. asphalt and other) but can be estimated at 1900-1950 kg/m^3.
Three physical properties of a crushed aluminum can?
Malleability- the ability to be pounded into thin sheets Density- the ability to be drawn or pulled into a wire Thermal Conductivity- The ability to transfer thermal energy from one area to another
How do you make cement from limestone?
you make it by mixing limestone powder and clay in a kiln
Why is limestone good for making cement?
Limestone is made up of calcium oxide which is the key ingredient to make cement. The limestone is mixed in with a particular clay to get the cement mixture.
Can ants live in crushed limestone?
No, ants cannot live in crushed limestone. Ants don't tend to like limestone and it acts as a deterrent. Furthermore, crushed limestone helps to balance pH levels.
Why do you put limestone on soil?
Crushed limestone is added to soil to reduce its acidity.
How does the density of the metal in a crushed can compare to the density of the metal before the can was crushed?
The density of the metal in a crushed can remains the same as the density of the metal before the can was crushed. The mass of the metal remains constant; only its shape changes when the can is crushed.
What types of rocks are mined by the Crushed and Broken Limestone industry?
The Crushed and Broken Limestone industry mines primarily limestone rocks for processing into construction materials such as crushed stone, sand, and gravel. Limestone is a sedimentary rock composed mainly of calcium carbonate and is widely used in various construction applications due to its strength and durability.
How does the density of the metal in a crushed can compared with the metals density before the can was crushed?
The density of the metal in a crushed can remains the same as the density of the metal before the can was crushed. While the volume of the can decreases when it is crushed, the mass of the metal remains constant. Therefore, the density, which is mass divided by volume, remains unchanged.
What is minimum recommended width bicycle tire for crushed limestone trails?
Crushed limestone trails can do a lot of damage to bicycles. It is important to have a tire that is at least an inch wide.
How much does a ton of crushed limestone weigh?
A ton of crushed limestone weighs around 2,700 pounds or 1.35 short tons.
What is the weight of one inch clean crushed limestone per cubic foot?
I just ran the ASTM (D 4253) Relative Density on this material and got 94.1 pcf.
How does the density of the metal in the crushed can compare with the density of the metal before the can was crushed?
The density of the metal in the crushed can remains the same as the density of the metal before it was crushed. Density is an intrinsic property of a material that does not change with physical alterations like crushing. So, the density of the metal in the can will not change due to the crushing process.
How does the density of a crushed metal can compare to the density of the metal can before it was crushed?
The crushed can will have a density that is quite a bit higher than the density of the can before it was crushed. Imagine a box of empty aluminum beverage cans. It won't weigh much. If those same cans are crushed, they will weigh the same, but take up a lot less space. The density of the cans can be increased by crushing them. The cans might be said to have a low bulk density before being crushed.
What is the conversion factor for 1 ton of 50mm crushed limestone to cubic meters?
The conversion factor for crushed limestone is 1.44 tons/m³. Therefore, 1 ton of 50mm crushed limestone would be equivalent to approximately 0.69 cubic meters.
What is the mass of 0.0249 L of limestone?
The mass of limestone will depend on its density. The average density of limestone is around 2.71 grams per cubic centimeter. You can calculate the mass by multiplying the volume (0.0249 L) by the density. Therefore, the mass of 0.0249 L of limestone would be approximately 0.0675 kg.
