If the nameplate states 20 amps then that is the full load amperage when the motor is running. The start up current on the motor could reach 300% of the FLA depending on the type of motor and the load that is connected to the motor.
depends what the source voltage isone horsepower equals to 746watts (assuming 100% efficiency)746 watts divided by voltage source equals current (amps)AnswerIn countries, such as the USA, where the horsepower is still used as a means of measuring power, it is always used to measure the output power of a motor.So, in order to determine the current drawn by the motor, you will first need to find out its input power. The input power is the output power divided by the machine's efficiency. Once you know its input power, then you can find its current by dividing the input power by the supply voltage. In practise, you will need to use a wattmeter to determine its input power.
Watts is a unit power and it is found muliplying Volts x Amperes, so how many amps to 230 watts depends on the voltage. If it is line voltage 120 V then 230 divided by 120 the result is a little less than 2 Amps RomeoTango
In Norway it is 230 Volts, 16-25 amp, 60 Hz, grounded In rest of Europe it is 110 Volts 10-15 amps, 50 Hz, probably grounded too.
30 HP at 480 (3 Phase) - 746 multiplied by 30 = 22380 22380 divided by 480 (3 Phase) = 46.5 46.5 divided by 1.73 = 29.5AMPS Motor speed and efficiency may change the actual result. Always refer to the name plate data
By Ohm's law, 120 volts across 230 ohms is 0.522 amps. By the power law, that translates to 62.6 watts. You ask about power loss. In order to answer that, you need to provide more information, such as some change in configuration, or some other component. Please review and restate your question.
To convert amps to watts, you need to know the voltage of the circuit. The formula to calculate watts is: Watts = Amps x Volts. Multiply the current in amps by the voltage in volts to get the power in watts.
4 amps
The resistance of the circuit will be 46 ohms
There are no watts to generate volts!! There is a relation that is watts = volts * Amps Generators are set up to generate a specific voltage regardless or watts or amps capacity it has.
One ampere (A) at 400 volts (V) is equal to 400 watts (W). This is because power (in watts) is calculated by multiplying voltage (in volts) by current (in amperes). So, in this case, 1A x 400V = 400W.
0.0005
The classification of 230 volts is in the low voltage range.
230 volts.
To find the amperage, use the formula: Amps = Watts / Volts. So, Amps = 1900 watts / 110 volts = 17.27 amps.
Depends on the model, usually there is a information plate on the device showing power consumption in watts, The theoretical current flow can be estimated from : I (current - amps) = Power (watts) / Voltage (volts). > So if you have a 1000 watt toaster @ 230 volts supply, the current in amps = 1000 / 230 = 4.35 amps.
230 volts
depends what the source voltage isone horsepower equals to 746watts (assuming 100% efficiency)746 watts divided by voltage source equals current (amps)AnswerIn countries, such as the USA, where the horsepower is still used as a means of measuring power, it is always used to measure the output power of a motor.So, in order to determine the current drawn by the motor, you will first need to find out its input power. The input power is the output power divided by the machine's efficiency. Once you know its input power, then you can find its current by dividing the input power by the supply voltage. In practise, you will need to use a wattmeter to determine its input power.