0
Answer: it will burn out
**Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted.
#Carryonlearning
If the bulb is remove from series circuit, the loop is break or no current flow.
And all the bulb in off state..
The series circuit is broken and all the bulbs go out from lack of power.
If you removed one bulb in the series circuit the other bulb will go out because series only go through one path of electricicty.
Current will cease to flow since removing the light bulb opens the circuit.
Add your answer:
Earn +20 pts
What happens to the potential difference of a bulb that burns out in series circuit?
The whole circuit fails - because the action of the bulb blowing cuts the circuit.
What happens to the brightness of the bulb when the second bulb is put into a series circuit?
it should become dimmer
What happens if you take a device out of a series circuit?
the light bulb gives off more light
In which circuit did screwing out one bulb not influence the lighting of the other bulb?
A parallel circuit will not effect the other bulb. If the bulbs are in a series circuit the other bulb will not turn on.
If a light bulb is missing in a series circuit will the bulb light?
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
What happens to the potential difference of a bulb that burns out in series circuit?
The whole circuit fails - because the action of the bulb blowing cuts the circuit.
What happens to the brightness of the bulb when the second bulb is put into a series circuit?
it should become dimmer
What happens if one bulb in a series circuit burned out?
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
If you unscrewed the second bulb in the parallel circuit when it was on what happens to the first?
Nothing. That's why it's a parallel circuit. If it was a series circuit, then the first bulb would go out.
If you unscrewed the second bulb in the series circuit when it was on explain what happens to the first?
Unscrewing any bulb in a series circuit turns them all off. This is the same as opening the switch that controls them.
What happens when one bulb is added to a series circuit?
The resistance is increased, the voltage across each bulb is decreased and the current through the circuit is reduced.
What happens if you unscrew a light bulb in a series circuit?
If you unscrew a light bulb in a series circuit, it will cause an open circuit, which will break the flow of current in the circuit. As a result, all other bulbs in the series circuit will also turn off because there is no longer a complete path for the electricity to flow.
What happens when a light bulb is broken in a series circuit?
In a series circuit, when a light bulb is broken, it creates an open circuit which stops the flow of current throughout the circuit. As a result, all the other light bulbs in the circuit will also stop working because they are all connected in a series.
What happens if you take a device out of a series circuit?
the light bulb gives off more light
What happens to the current in a circuit when one bulb is replaced by two bulbs in series?
current in series always stays the same
What happens when you unscrew a light bulb in a series circuit?
When you unscrew a light bulb in a series circuit, the circuit will break and all the other light bulbs in the circuit will turn off. This is because in a series circuit, the current flows through each component in succession, so removing one component interrupts the flow of current to the rest of the circuit.
If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?
Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.
