The PIC is a specific architecture of microcontroller.
microsoft consulting services
it is a programmable logic device which has a inbuilt memory, clock etc and is required to perform a specific task.
That depends on the specific microcontroller.
to determine the state condition of microcontroller's input when microcontroller is reading the input port
Microcontroller = (microprocessor+memory+peripherals) on a single chip
The PIC is a specific architecture of microcontroller.
Microcontroller have inbuilt memory, interrupts, etc. Which you will need to connect externally in microprocessor. Thus, Microcontroller is better than microprocessors
making EA pin high(i.e connecting it to +5V) means that microcontroller should look for the code in its internal memory. while making it low(i.e connecting it to GND) means that microcontroller should look for the code in the memory which is externally connected by the user. so when there is no external memory connected, simply tie EA pin to +5V supply.
microsoft consulting services
it is a programmable logic device which has a inbuilt memory, clock etc and is required to perform a specific task.
On-chip memory is a memory that resides on microcontroller itself. e.g RAM. It may be one of the Internal RAM or Special Function Register (SFR). Off-chip memory is external ROM or EPROM.
That depends on the specific microcontroller.
v stands for vaccum tube version
x
Microcontroller is a modern version of controlling system help to guide any type of electronic gadte in one word it is a "revolution" broght about in ffield of electronic world this has got a special type of ROM and ram (flash memory ) which are pre programmed and acts as an erasaable programmble read only memory and has got a set of registers in it which follows the pattern of A,B,R0,R1,R2,...........R8.....R16 and so on depends on the regiter it has it memory .
yes,microprocessor does not have it's own memory while microcontroller has it's own memory.microprrocessor has required peripheril devices'