asasasas
It does not contain unidirectional outputAnswerA purely resistive circuit is an 'ideal' circuit that contains resistance, but not inductance or capacitance.
if an element is constantly expanding and contracting (if you keep switching the hot water heater off and on again) all the time it causes cracks and over time the water leaks into the element causing it to short which means you have to replace it.
Because a generator extracts energy from whatever is rotating it and passes this (by the electric current it produces) down the circuit to the motor (or light bulb or heater) where it is used. When there is no complete electric circuit, no electricity can flow so no (little) energy is extracted, but when the circuit is closed, electricity does flow and the armature is more difficult to turn.
Thermal switch is to cut off the pilot ignition circuit when the heater temperature is beyond a set temperature. The thermal switch limits the temperature and protects the heaters
The oxygen sensor is "done". It should be replaced.
Trouble code P0135 means:O2 sensor heater circuit malfunction (Bank 1 Sensor 1)
Trouble code P1320 means: Distributor Signal Interrupt
Trouble code P0141 means:O2 sensor heater circuit malfunction (Bank 1 Sensor 2)
Heated oxygen sensor heater circuit malfunction (bank 1, sensor 1): Open or short in heated oxygen sensor heater circuit Heated oxygen sensor heater malfunction (Haynes Repair Manual)
O2 sensor heater circuit malfunction, Bank 1 Sensor 1.
Trouble code P1135 means: Air-Fuel Sensor Heater Circuit Response Malfunction
Trouble code P1155 means: A/F Sensor Heater Circuit Malfunction
Bank 2, sensor 1, O2 sensor heater circuit malfunction.
Trouble code P1133 means: Air-Fuel Sensor Circuit Response Malfunction Trouble code P1135 means: Air-Fuel Sensor Heater Circuit Response Malfunction
P0141 - O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2)
short circuit in the circuit