the all time time one don't run when using machinery always where goggles always look what you ae doing and where you are going always have a penical
its a car and a dog and a mouse
safety.
End point rule
blanking is an operation where the material is cutout by using a punch and die. The punch will be in the shape similar to that of the required blank. the cutout part is the part which is required and the left out material is the scrap. piercing is the opposite, the cutout part is the scrap and left out part is the final part.
Be careful for the sharp niddle..
Follow all manufacturer rules and firearms safety rules.
dont fall off
more than a million
Be careful and don't touch the thin file
Some safety rules in our school include no running in the hallways, following designated emergency procedures, and using equipment properly. It is important to follow these rules to ensure the safety of students, staff, and visitors, and to prevent accidents or injuries. Consistent adherence to safety rules creates a secure and organized learning environment for everyone in the school community.
when using a craft knife always slide the blade back in
Check that there are no nails or screws in the wood you are going to cut.
to prevent accidents that came from electricity.like fire
1.do not eat clay 2.do not eat or drink near clay
Most workplace accidents occur when personnel take short-cuts with health and safety rules. They are not concentrating while using machinery, or using machines with the safety guards removed.
There are many safety rules when using bending machines. Some of these include wearing safety glasses, tucking away long hair, not wearing rings while using the machine, wearing proper (close-toed) shoes and not wearing gloves or loose-fitting clothing as they have a greater likelihood of being caught in the machine. See the related links for more information.