0
Still curious? Ask our experts.
Chat with our AI personalities
Jordan
Blake
RafaAdd your answer:
Earn +20 pts
What are applications of electronic temperature transmitter and sensors?
applications: anywhere you need to know a temperature electronic advantages: you wont have to crawl to an awkward spot to use a thermometer Perhaps water temp while you drive your car perhaps temperature inside the oven when you make a Pizza disadvantages: power is required thermometer in grand pops medicine chest will work new electronic one may have a dead battery after ten years even if never used
What is a transparent latch in a microprocessor?
A transparent latch (or simply a latch) is a digital logic device that can store two stable states with a level sensitive control signal called enable/latch, when this control signal is in the enable state the latch device transparently passes its input signal to its output, when this control signal is in the latch state the latch device holds its output in the current state and ignores the input signal. This behavior is different from flip flops (e.g. D flip flop), which are usually clocked and often edge sensitive not level sensitive.
What is steam turbine overspeed tester?
Over speed test will be executed to ensure that the pump will tripped due to over speed. There is an electronic tripped set point by governor valve closing when the actual speed reach to maximum governor speed as well as Mechanical trip which will occur when the speed reach to electronic tripped and the valve not close due to malfunction of governor valve. Mechanical latch lever will slid to cut the HP steam. Electronic maximum governor speed will be less than mechanical speed set point.
Why SCR does not latch in AC circuit?
because it doesnt
How is information stored electronicly?
A transistor is a simple electronic device that is the key to storing information electronically. Transistors can be combined to form a "flip-flop", a "latch", or other simple devices. The flip-flop and latch work slightly differently but are both capable of storing one bit of information. One bit is basically just a 1 or a 0, on or off, just like a light switch. Electronically, a 1 is represented as a high voltage (relatively speaking) while a 0 is a low voltage.
