My BIC turntable accomplishes this with a different sized belt pully. They have a U.S. diameter (60 HZ) and a U.K. diameter. Their parts department stock both.
Joe
A: Sometimes a spectrum of frequency must be analyzed a voltage to frequency converter can be used to sweep a range of frequency just by changing some DC level.
No. It simply changes the voltage.
Converter is AC to DC. Inverter is DC to AC
First of all that's an incomplete question, in fact it could hardly even be called a question. Nevertheless I will attempt to answer what I think the question might be. A Frequency to Voltage converter simply converts a frequency to a voltage as the name would imply. The voltage output will vary linearly with the frequency input (assuming it was designed properly). They can be useful in devices such as tachometers or speedometers. Here's one example of a such an IC: http://www.national.com/mpf/LM/LM2907.html
A frequency converter converts alternating current of one frequency to alternating current of another frequency. Generally it's used for controlling the ac motor speed by changing the supply frequency.
A: Sometimes a spectrum of frequency must be analyzed a voltage to frequency converter can be used to sweep a range of frequency just by changing some DC level.
A: Sometimes a spectrum of frequency must be analyzed a voltage to frequency converter can be used to sweep a range of frequency just by changing some DC level.
No. It simply changes the voltage.
Converter is AC to DC. Inverter is DC to AC
using voltage controlled oscillator
First of all that's an incomplete question, in fact it could hardly even be called a question. Nevertheless I will attempt to answer what I think the question might be. A Frequency to Voltage converter simply converts a frequency to a voltage as the name would imply. The voltage output will vary linearly with the frequency input (assuming it was designed properly). They can be useful in devices such as tachometers or speedometers. Here's one example of a such an IC: http://www.national.com/mpf/LM/LM2907.html
It is not recommended to modify the original wiring of a turntable. Instead, you should use an adapter or extension lead to connect the turntable to a UK power outlet. This will ensure the safety and integrity of the turntable's electrical system.
A frequency converter converts alternating current of one frequency to alternating current of another frequency. Generally it's used for controlling the ac motor speed by changing the supply frequency.
the difference between a voltage converter to a voltage regulator,is that a voltage converter,converts or changing the desired voltage to be used while the voltage regulator,regulates the input of the voltage amount not to excess to its inputs.
voltage and frequency both are different quantity.. don't mix it...
Yes, if your electronic devices are not compatible with the UK's voltage of 230V, you will need a voltage converter to safely use them.
buck-boost converter is a type of DC to DC converter where the output voltage either higher or lower than the input voltage.