Party poppers are normally popped with a force applied by a finger. The force required is maybe 10 Newtons.
Guestimate - 2 kg force?
Work = (Force) x (Distance) = 60 x 5= 300 Newton Meters = 300 Joules
The force required to break concrete depends on various factors such as the type of concrete, its age, and the specific conditions of the concrete. In general, the compressive strength of concrete is measured in pounds per square inch (psi). For typical concrete mixes, the compressive strength can range from about 2,500 psi to over 10,000 psi. Therefore, the force required to break concrete can vary widely, but it typically takes thousands of pounds of force to break through concrete.
1 volt is.
The purpose of a lemon squeezer is to squeeze out the lemon to make lemon juice. It makes it much easier and faster to make lemon juice for everyone to enjoy.
A lemon can be used before it is ripe, but it will not have as much juice and be harder to squeeze. The ripeness of a lemon can be judged by its color, and it is ripe when no green tinge remains.
Slice a lime in half and squeeze the juice out of one of the halves.
its a calculation of how much force is required in relation to how much force is applied by the pads on the disc.
Lemons. Squeeze half a lemon on your hair in the summer or spring and let the sun do it's magic! Do this as much as needed.
60060
Squeeze the juice of two lemons -- the heavier the better -- into a glass of room-temperature water.
about 3 tablespoons from a freshly squeezed man... wait...
The force required can be calculated using Newton's second law, F = m * a, where F is the force, m is the mass (2 kg), and a is the acceleration (3 m/s^2). Therefore, the force required is 6 N.
Party poppers are normally popped with a force applied by a finger. The force required is maybe 10 Newtons.
If the pulley is fixed (hanging from the ceiling), and the rope passes over it, then 100 lbs of force is required. If the rope is fixed to the ceiling and passes under the pulley (which is fixed to the load), then 50 lbs of force is required.
depends on the mass of the train