0
The lathe is Specified on the basis on the following factors:
1.Lathe swing or simply swing i.e maximum diameter of the workpiece that can be machined.
2.Maximum distance between the HEadstock and tailstock.
3.Length of the bed.
then there are many kinds of lathe categorized by their specific functions or mechanisms but these are the general specifications for every lathe.
Add your answer:
Earn +20 pts
Is lathe a lever or not?
A lathe is not a lever.
Give the type of lathe machine?
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
What are the short comings of lathe machines?
what is lathe machine in short answer
What is profiling on lathe machine?
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
What is a person called that works on a metal lathe?
People that work on a metal lathe are called a Turner, a Machinist or a Lathe operator depending on their trade or qualifications.
Is lathe a lever or not?
A lathe is not a lever.
Is a lathe a lever?
A lathe is not a lever.
How do you secure metal on a lathe?
By putting it in the Lathe
Wood Lathe?
form_title= Wood Lathe form_header= Make woodworking easy with a wood lathe. What is your maximum budget?*= _ [50] Do you want a portable wood lathe?*= () Yes () No Are you replacing an old wood lathe?*= () Yes () No
What is bench lathe?
The definition of a bench lathe is defined as a lathe mounted on a workbench. There is no other meaning for these two words other than a lathe mounted on a workbench.
Aligment lathe mechince?
please tel me why must aligment lathe machince aligment lathe mechince
What is imagination lathe?
lathe machine, power depends on the size and power of electric motor and gearbox lathe.
What is a lathe backing plate for?
The backing plate on a lathe is used to mount the chuck to it and is the adapter to the lathe spindle.
What is a Blanchard lathe?
A blanchard lathe is a lathe for turning irregular forms after a given pattern, such as lasts, gunstocks, etc.
Give the type of lathe machine?
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
Do new rotors need to be machined before use?
No just put them on. If they were bad they could be sued for a defective product. Actually Honda/Acura specify that NEW rotors be "refinished" with an on-car brake lathe...
When was The Lathe of Heaven created?
The Lathe of Heaven was created in 1971.
