With cable inserted, lock code on current code or factory code 000, if you haven't changed it, turn the lock up diane down. The button on the bottom is oval. Put your fingernails on both ends, and life the button away from the lock housing, and turn it 90 degrees. Set your new code. Return the button housing back to its original position. Push button in all the way to release the cable. Should be all ready to go.
http://www.safeskieslocks.com/support.html
Yes, it has a three number TSA approved combination lock.
A TSA 003 is a combination lock. To reset it, the shackle must be spun for 180 degrees after the current code has been entered. It is now in the reset position.
Reset instructions for Samsonite TSA approved luggage lock (TSA002) Step 1. Use the default lock code 000 to unlock. Step 2. Turn the locking loop 90 degrees left with the dial numbers facing you. Step 3. Push and hold the locking loop down. Step 4. While holding the locking loop down against the internal spring reset the 3 digit code. Step 5. Release the locking loop. Step 6. Don't forget the new lock code. Step 7. Set locking loop into locked position and change the three digit numbers. Step 8. Lock should be locked. Step 9. Unlock- enter you new three digit code to unlock. L.G. Wall
Yes, HOWEVER- if it is locked, and TSA needs to inspect the inside of the luggage, they CAN break it open. You should leave it unlocked.
Set the combination to the correct setting, then press the button that may be placed on the bottom of the lock, or somewhere else, and while holding that down, change the code to what you desire it to be.
All the TSA locks have a key that is used only by the TSA to open the lock.
TSA luggage locks are just like regular luggage locks but with a Liberty Torch symbol on them. They will also have a TSA code on it. This indicates that airport security is able to use their keys on those locks to quickly check the contents.
Reset instructions for Samsonite TSA approved luggage lock (TSA002) Step 1. Use the default lock code 000 to unlock. Step 2. Turn the locking loop 90 degrees left with the dial numbers facing you. Step 3. Push and hold the locking loop down. Step 4. While holding the locking loop down against the internal spring reset the 3 digit code. Step 5. Release the locking loop. Step 6. Don't forget the new lock code. Step 7. Set locking loop into locked position and change the three digit numbers. Step 8. Lock should be locked. Step 9. Unlock- enter you new three digit code to unlock. L.G. Wall
Look on the bottom there should be a reset button. It is very small and you have to use a pen point or paperclip to push it in. Set it to the numbers you want and then remove your pen/paperclip.
The specialty of using TSA locks is that a consumer can pick her or her combination for their lock, as opposed to having the manufacturer set the lock combination.
To reset or put in a custom code for your TSA suitcase lock follow these instructions. Set the lock to the default code of 000; use a sharp item to press the reset button in do this until you hear a click. Set your own custom code, pull the catch out as if to open the suitcase lock until you hear another click, your custom lock combination is now set.