0
Still curious? Ask our experts.
Chat with our AI personalities
Jordan
Coach
BeauAdd your answer:
Earn +20 pts
What term describes signal interference that results from the motion of electrons in a wire?
Thermal noise
Difference between noise and interference?
Audio means that it is audible, in other words, that humans are capable of hearing, whereas sound extends beyond the human ear capabilities, like ultrasound which is higher pitched than what our ears can hear.
What do you mean by interference and noise in electronics signals and systems?
One person's interference is another person's signal ... literally. For example, in ordinary AM radio, signals on the same frequency as a local station, but coming from another city some distance away, may cause background sounds that make listening to the station difficult or unpleasant. In other cases, transmitters emit 'harmonics' of their intended radio signal, which overlay carriers on other frequencies producing a similar effect. There are many other causes and sources of interference. Noise is another matter however, although it also 'interferes' with the operation of systems. Ordinarily, noise is no one else's signal, that is, it does not carry any information. Sources of noise include automobile ignition systems, electric motors, and the Sun, among many other things. The result is the same as far as the signal of interest is concerned however - both noise and interference cause problems receiving the desired signal properly, whether by causing objectionable sounds in the background of a radio program, 'snow' on a (non-digital) TV display, or errors in digital reception or data transmission (which can cause the complete loss of a digital TV signal for example). Noise and interference are also problems in systems where there is no intent to transmit or receive a radio carrier. For example, in computer systems, traces on circuit boards or in cables move data from one place to another in order to carry out the functions of the system. When traces are placed next to each other over (relatively) long distances on the circuit board or in a cable, the impulses can couple into the adjacent traces causing errors in the data transferred, such as corruption of data files or malfunctions of programs. In this example, the source of the problem is technically 'interference', but noise can also occur within systems, for example from a defective power supply or a poor contact in a connector. Many techniques are widely used to avoid the problems of noise and interference, including shielding, twisted pair wiring, FM and PM modulation, and forward error correction (FEC) among others. --- Very lengthy explanation of something very simple, NOISE INTERFERENCE is really unwanted signals introduced by noisy parts. Interference, however, may come from radio, tv, magnetics, and many other sources, including blocking of the signals. --- (See discussion)
Why negative voltage is used in BTS in GSM system?
Because 2 terminal comes out from the battery and through red wire we ground the +ive terminal so that possibility of noise interference will get zero....noise occur only in the +ive terminal.....thats why we use -ive voltage.
What could be causing frequency interference at 101.1 FM on a plug-in home radio?
There are at least 50 different possible sources of perceived interference to an FM radio. Most likely is electrical noise from a nearby motor, fluorescent light fixture, or light dimmer. That's my opinion; I could be wrong.
