The only time I welded corten I used 7018 electrodes. I was told that elements in the corten mixed with the electrode in the weld giving it rust resistant capabilities.
6010 is a high cellulose sodium based electrode, which can be used to weld carbon steel pipes.
hello what is filler metal (electrode) for welding of spring steel like 1.5142, 1.5225, 1.7138? regards
The angle of the electrode, the speed of the electrode used to weld and the size of the electrode.
dissimilar steel grades and the unknown grade ss can easily welded with the help of 680CGS lnt welding electrode
The only time I welded corten I used 7018 electrodes. I was told that elements in the corten mixed with the electrode in the weld giving it rust resistant capabilities.
6010 is a high cellulose sodium based electrode, which can be used to weld carbon steel pipes.
hello what is filler metal (electrode) for welding of spring steel like 1.5142, 1.5225, 1.7138? regards
Use special flux cored electrode without purging dam.
The angle of the electrode, the speed of the electrode used to weld and the size of the electrode.
Usually the same type that is used for the rest of the weld.
dissimilar steel grades and the unknown grade ss can easily welded with the help of 680CGS lnt welding electrode
Shortening the electrode extension typically reduces weld penetration. This is because a shorter electrode extension results in a smaller arc length, which reduces the heat input into the weld and leads to less penetration. It is important to maintain the proper electrode extension to achieve the desired weld penetration.
what characteristics does the weld bead have when weaving the electrode
It varies from 3 inches to 13 inches. The electrode type, type of weld, and position of weld all determine how far you can get done with a single rod
Yes, you can weld steel to steel. You can use steel welding rod.
motion of the electrode causes different pattterns in th formation ofthe cooling weld puddle. You can alter the weld patter by changing the electrode motion,,ex: motion straight across the weld zone and dropping electrode position say (1/8th inch) produces given pattern..same pattern with a slight upward motion at edges of weld zone another pattern...etc etc