0
Add your answer:
Earn +20 pts
What is rf in?
radio frequency input
What is rf input in physics?
In physics, "RF" typically refers to radio frequency. The RF input is a signal or electrical input that operates within the radio frequency range, typically in the range of 3 kHz to 300 GHz. This input is commonly used in communication systems, radar systems, and various electronic devices that transmit or receive radio waves.
Is coaxl input on tv HDMI?
The coaxial RF input on a HDTV will process a HD signal but it is not an HDMI input.
What RF levels are commonly considered to be an indication of sufficient analog video level at the RF input of a TV set?
0 to -5
How do you calculate gain of an inverting and non-inverting OP-Amp configuration?
gain in an op-amp is the output voltage divided by input voltage. for the inverting amplifier , gain(Av)=-(Rf/Ri) ,where Rf => resistance of the feedback path & Ri=> inverting input terminal resistance for the non-inverting amplifier , gain(Av)=(1+(Rf/Ri)) , where Rf => same & Ri=> non inverting input terminal resisance
What if rf input and outputs are reversed on a TWT?
If the RF input and output are reversed on a traveling wave tube (TWT), the amplifier will not function correctly. The input signal would not be amplified but instead sent back out through the input port. This would result in no signal being output through the intended output port.
How can you tell if a sony High Definition tuner is built in?
If it is widescreen and has an antenna (RF) input.
Can you use an outdoor antenna with a flatscreen tv?
Yes, if it has an antenna input connector, (RF in).
Your HDTV does not have an hmdi input how should you connect your cable box to the tv?
In descending order of quality, Component, S-Connector then Video. The RF or antenna input is the poorest.
Trying to use cable for morning announcements to classrooms only getting a blue screen using a VCR for input and output as well as a computer direct to VCR-tv?
Not sure what your computer does or not but the VCR is the source signal: coax from VCR out ("to TV" or "RF out") plugs into TV ("in" or "RF input"). Once hooked up, tune the TV to ch 3. Then play a tape in VCR and you should be ok. If all ok then plug in an antenna into the "RF in" (antenna in) on the VCR. Tune into a local station, you should be able to catch local programing. Cheers
What is HT640 RF encoder?
What is rf transmitter
What is rf surveying?
wt is RF SURVEY?
