Amperage is electric current of flow.
The amperage of a T2L 250v fuse is typically 8 amps. It is a misconception that it has an amperage of 3.
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
This doesn't make sense, "current" is "amperage" so the higher the voltage the lower the amperage, and the lower the voltage the higher the amperage.
There is no proper amperage...no such thing as amperage, its called current... measured in amps...
Wire size is based on the amperage drawn. To find the amperage, the voltage must be stated. Use this formula to find the amperage. I = W/E. Amps = Watts/ Volts. Once you have the amperage, restate your question using the new found amperage or state the voltage that supplies the lights.
How much amperage for a hotpoint 20 inch stove
a ten-wrap amperage multiplier is used with a (n)
The amperage is governed by the load that is connected to the battery circuit. Divide that amperage into the 1.6 amp hours and that will give you the endurance of the battery in hours.
To calculate the amperage, you need to know the resistance in the circuit. Amperage is calculated using Ohm's Law: Amperage (A) = Voltage (V) / Resistance (R). Without knowing the resistance, we cannot determine the amperage.
Wire is sized by the amperage that it will carry. 5 kW is 5000 watts. The equation to find watts is W = Amps x Volts. The equation to find amps is Amps = Watts/Volts. As you can see a voltage is needed to calculate the amperage. Once the amperage is stated, the wire size can be given for that particular amperage.
Generally speaking an appliance (eg tv) is supplied with power so when it is off it has voltage supplied. After yo turn it on it starts to draw power called amperage the voltage doesn't get higheur but the amperage does Amperage is the load being drawn through a circiut