Level = 20 times log (6/2) = 20 times log (3) = 9.54 dB
Decibel is no real unit, it is a pseudo unit. The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity. A change in voltage ratio by a factor of two is approximately a 6 dB change. A change in power ratio by a factor of two is approximately a 3dB change.
When the voltage increases the temperature in the diode also increases. When the temperature in the diode increases, the resistance decreases.
If the resistance increases, while the voltage stays the same, current will decrease. Current = voltage divided by resistance
If current increases, then voltage also has to increase, assuming that resistance stay relatively the same. Power will also increase. Since power is the product of voltage and current, then the power increase would be the square of the voltage or current change.
Decibels describes changes in power, not voltage. If the question meant to say value instead of voltage, then a power change from 100 to 50 is -3 decibels, or -3dB.Decibels is 3 log2 (POWER OUT/POWER IN).
A: 1/7
When a current flows through a capacitor, the voltage across it increases or decreases depending on the rate of change of the current. If the current is constant, the voltage remains steady. If the current changes rapidly, the voltage across the capacitor changes quickly as well.
Voltage attempts to make a current flow, and current will flow if the circuit is complete. It is possible to have voltage without current, but current cannot flow without voltage. The answer is "yes",voltage remains the same as current moves through the circuit.As the voltage remains constant, current increases in the circuit.
Changing the temperature increases the change in energy.
If an RF amplifier amplifies the incoming signal by 200 times, the power gain of the amplifier is +25.9 dB. Power is proportional to voltage squared, so the power gain is 400. The decibel scale is 3 times log2 of the power change.
Capacitance is a measure of how much charge a capacitor can store for a given voltage. As the voltage across a capacitor increases, the capacitance typically remains constant. However, in some cases, the capacitance may change slightly due to factors like dielectric breakdown or non-linear effects.
A change from 2400 to 2520 would be a 5% increase.