0
From EPA website:
Emissions of SO2 from natural gas-fired boilers are low because pipeline quality natural gas typically has sulfur levels of 2,000 grains per million cubic feet.
However, sulfur-containing odorants are added to natural gas for detecting leaks, leading to small amounts of SO2 emissions. Boilers combusting unprocessed natural gas may have higher SO2 emissions due to higher levels of sulfur in the natural gas. For these units, a sulfur mass balance should be used to determine SO2 emissions.
P.S. 7,000 grains = 1 pound so in 1 million cubic feet of natural gas there would typically be 0.286 lbs of sulfur.
The sulfur content in natural gas can vary, but typically ranges from 0 to 0.5 grams per cubic meter. Natural gas with lower sulfur content is considered cleaner and more environmentally friendly. Regulations may restrict the sulfur content in natural gas to reduce emissions during combustion.
Add your answer:
Earn +20 pts
What is a non metallic element found in coal and natural gas?
Sulfur is a non-metallic element found in both coal and natural gas. When coal and natural gas are burned, sulfur can be released into the atmosphere as sulfur dioxide, which is a major contributor to air pollution and acid rain.
What fossil fuel releases no sulfur when burned?
Natural gas releases no sulfur when burned, making it a cleaner alternative to other fossil fuels like coal and oil.
How we get it sulfur?
Sulfur is commonly obtained through mining, particularly through the extraction of sulfur-containing ores such as pyrite. It can also be recovered as a byproduct of oil and natural gas processing. Additionally, sulfur can be produced from the hydrogen sulfide gas in industrial processes.
What is the btu heat content of 1 cubic foot of natural gas?
The heat content of natural gas can vary depending on its composition, but on average, 1 cubic foot of natural gas contains about 1,050 BTUs (British Thermal Units) of heat energy.
What is the typical heat content of 1 cubic foot of natural gas?
The typical heat content of 1 cubic foot of natural gas is around 1,030-1,100 BTUs (British Thermal Units). This can vary slightly based on the composition of the natural gas.
What is sweet gas?
Sweet gas refers to natural gas that has a low sulfur content. It is considered "sweet" because it does not have the sour smell associated with higher sulfur content gases. Sweet gas is typically easier to process and safer to handle compared to sour gas.
How sulfur dioxide is produced from fossil fuels?
Sulphur is contained in most fossil fuels, it burns as well. Answer: Sulfur in fossil fuels is present as sulfides, disulfides and mercaptans. The followig ist is brief comparison of the expected (nonnumeric) amounts to be expected by fuel type: * Coal - Low to High Sulfur content* Bunker Oil - Low to High Sulfur content* Heavy Diesel - Low to High Sulfur content * Diesel/Furnace oil - Low sulfur* Gasoline - Low sulfur * Butane - Low sulfur (a few ppm as odorant )* Propane - Low sulfur (a few ppm as odorant ) * Methane - Low sulfur (a few ppm as odorant ) * Natural Gas - Low sulfur (a few ppm as odorant ) * Sour Natural Gas - High sulfur* Refinery Off Gases - Low to High Sulfur content
What is the minerals of Texas?
oil, natural gas, natural-gas liquid, helium, salt, sulfur, and clay
What is a non metallic element found in coal and natural gas?
Sulfur is a non-metallic element found in both coal and natural gas. When coal and natural gas are burned, sulfur can be released into the atmosphere as sulfur dioxide, which is a major contributor to air pollution and acid rain.
What fossil fuel releases no sulfur when burned?
Natural gas releases no sulfur when burned, making it a cleaner alternative to other fossil fuels like coal and oil.
Fossil fuel with lowest sulfur content?
Sweet natural as has essentially no sulphur.
How is sulfur dioxide produced from burning fossil fuels?
Sulfur dioxide is produced from burning fossil fuels that contain sulfur, such as coal and oil. When these fuels are burned, the sulfur in them reacts with oxygen in the air to form sulfur dioxide. This process is a major source of sulfur dioxide emissions in the atmosphere, which can contribute to air pollution and acid rain.
How you could reduce the sulfur in the fuel content to be used in the power plant?
If the fuel is coal, you simply have to switch to a coal with a lower sulfur content. You can remove the SOx from the flue gas with ammonia scrubbing. If the fuel is fuel oil a lower sulfur fuel oil can be used. Otherwise the oil must be treated in a hydrodesulfurization unit which is probably not economical due to the hydrogen required. If the fuel is natural gas, sulfur can be absorbed by absorption with a sulfur free amine such as MDEA (monodiethanolamine). The sulfur is later removed from the amine during the amine regeneration process which results in a sulfur rich stream.
What is the difference between G20 natural gas and G25 natural gas?
The main difference between G20 and G25 natural gas is the composition of methane in each type. G20 natural gas has a higher methane content, typically around 87%, while G25 natural gas has a lower methane content, around 75%. This difference can affect the energy content and combustion characteristics of the gas when used in heating or industrial processes.
How we get it sulfur?
Sulfur is commonly obtained through mining, particularly through the extraction of sulfur-containing ores such as pyrite. It can also be recovered as a byproduct of oil and natural gas processing. Additionally, sulfur can be produced from the hydrogen sulfide gas in industrial processes.
What is the btu heat content of 1 cubic foot of natural gas?
The heat content of natural gas can vary depending on its composition, but on average, 1 cubic foot of natural gas contains about 1,050 BTUs (British Thermal Units) of heat energy.
What is the typical heat content of 1 cubic foot of natural gas?
The typical heat content of 1 cubic foot of natural gas is around 1,030-1,100 BTUs (British Thermal Units). This can vary slightly based on the composition of the natural gas.
