0
One might say resin, filler, solvent are the base 3, but you need more. So,
Resin to form the paint film (this is the starting point for any formulation)
Fillers for opacity, durability (also impact chem resistance, water resistance)
Solvent to maintain liquid state until applied (water or traditional "solvent")
But add in:
dispersant to help get the fillers into the resin
thickeners to help brushing/rolling characteristics, sag control
pigments for colour
additives for UV stability, in-can stability, film forming, etc as required
Add your answer:
Earn +20 pts
What are the 3 raw materials used in the blast furnace?
The three raw materials used in a blast furnace are iron ore, coke, and limestone. Iron ore is the primary source of iron, coke is used as a fuel and reducing agent, and limestone helps to remove impurities from the iron ore.
What are 3 common materials that were developed by scientist?
Three common materials developed by scientists include silicone, Kevlar, and synthetic polymers. Silicone is a flexible material used in sealants, adhesives, and medical implants. Kevlar is a strong synthetic fiber used in bulletproof vests and protective gear. Synthetic polymers are versatile materials used in a wide range of products, such as plastics and synthetic fibers.
Can you make bricks from lime and coal ash?
Yes, you can make bricks from lime and coal ash. These materials are often used in the production of fly ash bricks, which are eco-friendly and have good strength and durability. Lime helps in binding the materials together, while coal ash acts as a pozzolan that enhances the properties of the bricks.
What are the 3 types of materials?
The three types of materials are metals, polymers (plastics), and ceramics. Metals are typically strong and malleable, polymers are lightweight and often flexible, and ceramics are hard and brittle. Each type of material has unique properties that make them suitable for different applications.
What are 3 common uses of minerals?
Three common uses of minerals are in construction (such as granite and limestone used for building materials), in electronics (minerals like copper and gold used in circuitry), and in agriculture (minerals like phosphorus and potassium used in fertilizers).
Materials used to make a playstation 3?
Dead orphans
robert mixed 1 1/3 liters of blue paint with 1 2/3 liters of red paint to make 3 liters of purple paint. To make a new batch of purple paint he used 2 liters of red paint. Using the same ratio robert should use ___ liters of paint?
he should use 25
What are the 3 raw materials used to make iron?
On RuneScape? A pickaxe, iron ore, and a furnace.
How do you pass level 3 on factory balls 3?
first you paint it red then u make the ears then u paint it blue and then u make the nose
You used 3 buckets of paint each bucket hold about 3 liters how much paint did i use?
3x3x3=27
Albert used 38 of a half a gallon of paint. what fraction of a gallon of paint did he use?
He used 3/16 gallon.
What is a liquid used in paint 3 letter word?
oil
What is a 3 letter word for liquid used in paint?
oil
Which materials are used to make a camshaft?
most camshafts are cast iron with 3/64 inch hard chrome on the contact surface
How do you pass level 17 on factory balls 3?
first you paint it red then u make the ears then u paint it blue and then u make the nose
The painter mixed a one-sixth gallon of red paint with a one-half gallon of yellow paint How much orange paint did he make?
The painter made 2/3 gallon of orange paint by mixing the red and yellow paint.
How many valves are used in the low pressure paint system?
3
