answersLogoWhite

0


Best Answer

Directly, it means one of the force sensors is reading low. I think the left one.

But, on my 4100 balancer, i had an issue with the angular position sensor (the encoder wheel) which for some reason gave me the same error.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does code lp6 lo mean for a fmc 4100 spin balancer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What does the name spin mean?

spin is a code name on elite beat agents!


How do you calibrate fmc 4100 wheel balancer?

1. Press F1 and SPIN 2. The display will read "CAL Slu". Attach the round calibration weight (stored on the back of the machine near the power switch) in the threaded hole on the outer edge of the balance shaft flange. 3. Press SPIN again or lower the Wheel Guard to initate the balancer spin cycle. The shaft will turn for about 15 seconds. 4. The display will then change to "CAL 0". Remove the calibration weight and Press SPIN or lower the wheel guard to perform the second step of calibration. 5. After another 15 seconds of spin the display will read "CAL Good" to indicate a good calibration. The operators with this information can be download from: http://www.snaponequipment.com/common/op-manuals/jb/past-products/4100_om.pdf Also, make sure the device is on a very stable surface like concreate. Wood floors will allow the machine to move during balance and can produce a tire that is out of balance even if the machine says the balance is good.


How do you calibrate a FMC 4100 wheel balancer?

1. Press F1 and SPIN 2. The display will read "CAL Slu". Attach the round calibration weight (stored on the back of the machine near the power switch) in the threaded hole on the outer edge of the balance shaft flange. 3. Press SPIN again or lower the Wheel Guard to initate the balancer spin cycle. The shaft will turn for about 15 seconds. 4. The display will then change to "CAL 0". Remove the calibration weight and Press SPIN or lower the wheel guard to perform the second step of calibration. 5. After another 15 seconds of spin the display will read "CAL Good" to indicate a good calibration. The operators with this information can be download from: http://www.snaponequipment.com/common/op-manuals/jb/past-products/4100_om.pdf Also, make sure the device is on a very stable surface like concreate. Wood floors will allow the machine to move during balance and can produce a tire that is out of balance even if the machine says the balance is good.


Why does Nissan Quest shake a lot at 50 MPH and less shaking at 60 MPH?

It's almost always a wheel balance problem. Take the vehicle to your tire store and have the wheels rotated and balanced using a SPIN balancer. The cheap "bubble" balancer does almost no good.


What does spin a yard mean in a idiom?

Nothing. Perhaps you mean "spin a YARN," which means to tell a story.


What does the idiom to spin a yard mean?

Nothing. You may mean "spin a yarn," which means to tell a tale or story.


Is there great spin attack AR code for phantom hourglass?

no there is not


What is is code for elitists sword on Free Realms?

No code for it. If you land on the weapons slot on your spin, you might get one.


What does it mean when a person calls you a spin?

a spinner or spin some one who loses the plot


What does spin on axis mean?

astronomy


Does spin mean rotation?

yes


Could a cat spin?

Depends what you mean.