anti-roll bar is used to reduce body roll
it has a roll bar that is bolted to the body its called a sport bar not much protection compared to a roll bar welded to the frame
Short, bra tops require a header for the windshield for install. The hard plastic lip goes into the header and the straps on the top will wrap around the roll bar.
I have Answers.ext. How do I install Answer Bar, the slide bar at the lower right of the screen.
If your roll bar is in the up position after you hit a bump or something like that, you only need to press and hold the switch(for the up and down position of the roll bar)pressed in for the up position for about 5 to 10 seconds. Doing this you reset the roll bar. After that the roll bar will work as normal Roger(Norway)
An anti-roll bar is a bar which is stressed to reduce the effect of a car leaning to one side during cornering.
Try This : Install a bigger, firmer aftermarket anti-roll bar. I have not yet done it to mine (2000) - but I hear of good results.
Because roll bars are designed for specific makes and models of vehicles, Personally I would order one on line from either carparts.com or stock car parts and have a reputable local expert install it.
roll bar
Anti-Roll Bar or Sway Bar
IAMGP is the install bar grating in Anchorage, AK.
the reason the roll bar won't go down is ,either roll bar was activated by an impact or it was activated if vehicle was jacked up with keys in the ignition. You will have to do a manual reset on the roll bar to reset. this is done with the tool provided in your tool kit.